Replaces

2002-05 Dodge Ram 1500 Truck Shock Absorber TRQ SBA60206 - 1ASSP00332

Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the shock absorbers (0:41)
    • Spray penetrating oil on the two bolts at the top and the bottom.
    • Use an 18 mm wrench to remove the top nut. Use a second wrench to anchor the bolt while you remove the nut.
    • Use a 21 mm socket to remove the bottom bolt.
  2. step : Install the new shock absorber (2:40)
    • Thread on the washer and bushing and put the bottom bolt into place and torque to 100 ft lbs.
    • Secure the top locking nut nice and snug.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 18mm Socket
  • 21mm Socket

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
Good OEM replacement
Received it quick and packaged well. Removing the old shocks were not bad use some penetrating oil to get off bolts. Be careful rear upper bolt has a spin catch on the uppers can catch your finger if not careful. The new ones went in smoothly. Only issue was rear shock didn’t have a rubber bushing where it bolts to rear axle parts store didn’t carry one. I installed without torquing it to 100ft/lbs. Been on for 2 weeks no issues with noise. Noticeable difference in ride and wheel hop, good improvement. Hope they last.
June 13, 2018
Purchased
2 weeks ago
REPLACING SHOCKS
extremely difficult removing old shocks,easy putting in new ones, truck rides great now.
February 21, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2005 Dodge Ram 1500 Truck 4 Wheel Drive Front & Rear Shock Absorber 4 Piece Set TRQ SBA60206

This part replaces:

  • Monroe 37207
  • Monroe 37208
  • KYB 344385
  • KYB 344399
  • TRQ SBA60206
  • OE # 25984613
  • OE # 5073261A
  • OE # 5073262AB
  • OE # 5101782AA
  • OE # 52110202AA
  • OE # 89038654
Part #: 1ASSP00332


TRQ
Brand #: SBA60206

How-to Video:

(04:35 min)