Replaces

2002-05 Dodge Ram 1500 Truck CV Axle Shaft - 1AACV00156

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications

  • Fits LH (Driver Side) or RH (Passenger Side) FRONT
  • CV Style Axle Shaft
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Note: You may need to reuse your original inner stub shaft with this new replacement CV axle.  The splined shaft on the inner joint from your original assembly can be removed and installed onto the new CV assembly.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:04)
    • Loosen the lug nuts and the hub nut.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the front CV Axle (2:07)
    • Remove the hub nut.
    • Tap the axle with a hammer to break it free from the hub.
    • Use a pry bar to pull the axle from the transmission.
    • Pull the axle out.
    • Sometimes this step takes a bit of finesse.
  3. step : Install the new axle. (3:33)
    • Position the new axle into the hub.
    • Put the hub nut back on.
    • Now that you have some leverage, push the other end of the CV axle into the transmission.
  4. step : Put the wheel back on (4:55)
    • Put the lug nuts back on.
    • Torque the hub nut to 185 foot lbs.
    • In a star pattern, torque the lug nuts to 120 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 35mm Socket
  • 22mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do these axles come per greased?
Matthew H April 21, 2016
Yes, these will come with the boot completely on the axle. These will have grease in these boots.
Derek C April 21, 2016
Does this axel fit driver side cause I know the passenger side is a little longer?
John S June 10, 2016
The 2 cv axles driver and passenger are the same. Its the intermediate axle shafts that are different
Brian F June 10, 2016
The CV axle shafts on the 2002-2005 Dodge Ram 1500 are both the same length. So yes it will work on the drivers side. The front differential is offset, which might be what you are thinking of.
Bryce N June 11, 2016
Year Make Model Description
2002-2005Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Outer CV Axle Shaft Driver or Passenger Side
Part #: 1AACV00156


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:59 min)