Part Details

  • Quantity: Pair
  • Light Option:
    HID (High-Intensity Discharge)
    without Ballast

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 26075-3Z701, 260753Z701, 26025-3Z701, 260253Z701
  • Includes lenses and housings
  • Bulbs, Ballasts, and Ignitors are NOT included
  • Direct replacements for Xenon or HID (High Intensity Discharge) Style Headlights
    • Not correct for models with Halogen Style Headlights
These headlights are great replacements and have good cost savings over headlights from the dealer.
Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs. Occasionally lighting manufacturers do leave test bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, Parking light, Fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Headlight (0:41)
    • Remove the Phillips head screw underneath the inner fender
    • Pull back the inner fender
    • Remove the two 10mm bolts from behind the inner fender
    • Pry off the plastic clips from the bumper cover with a flat blade screwdriver
    • Remove the two 10mm bolts from the top of the headlight bracket
    • Pull the bumper cover out
    • Remove the 10mm bolt underneath the headlight
    • Pull the headlight out
    • Disconnect the headlight wiring harnesses
  2. step : Replacing the Bulbs (3:15)
    • This step is only necessary if you are replacing the headlight bulbs
    • Turn the base of the bulbs counterclockwise
    • Remove the old bulbs
    • Insert the new bulbs
    • Turn the new bulbs clockwise
    • For the main bulb, turn the cover counterclockwise
    • Disconnect the main bulb wiring clips
    • Pull up the main bulb wire retainer
    • Push the new main bulb in
    • Reconnect the wiring retainer
    • Reconnect the wiring clips
    • Reconnect the cover, turning it clockwise
  3. step : Installing the New Headlight (4:52)
    • Remove the turn signal bulb from the old light
    • Install the turn signal bulb in the new light
    • Connect the headlight wiring harnesses
    • Put the new headlight into place
    • Insert and tighten the two 10mm bolts at the top of the headlight
    • Pull back the bumper cover
    • Insert and tighten the 10mm bolt at the bottom of the headlight
    • Insert and tighten the 10mm bolt at the side of the headlight
    • Push the bumper cover back into place
    • Pull back the inner fender
    • Insert and tighten the two 10mm bolts behind the inner fender
    • Push the inner fender back into place
    • Insert and tighten the Phillips screw for the inner fender
    • Install the plastic clips for the bumper cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002-2004Nissan Altima Nissan Altima HID (High-Intensity Discharge) Headlight without Ballast Pair

This part replaces:

  • Partslink NI2503143, NI2502143
  • OE # 260253Z701
  • OE # 260753Z701
Part #: 1ALHP00864

Out of Stock

How-to Video:

(07:13 min)