Replaces

2002-04 Nissan Altima Headlight Driver Side - 1ALHL01634

Specifications

  • LH (Driver Side)
  • Replaces dealer part number: 26075-3Z701, 260753Z701
  • Includes lens and housing
  • Bulbs, Ballast, and Ignitor are NOT included
  • Direct replacement for Xenon or HID (High Intensity Discharge) Style Headlights
    • Not correct for models with Halogen Style Headlights
This headlight is a great replacement and has good cost savings over a head light from the dealer.

Fit guaranteed

  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.

Quality

  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.

Value

  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.

Safety

  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather..
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Side Location: Driver Side
  • Light Option: HID (High-Intensity Discharge)
  • Light Option: without Ballast

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Removing the Headlight (0:41)
    • Remove the Phillips head screw underneath the inner fender
    • Pull back the inner fender
    • Remove the two 10mm bolts from behind the inner fender
    • Pry off the plastic clips from the bumper cover with a flat blade screwdriver
    • Remove the two 10mm bolts from the top of the headlight bracket
    • Pull the bumper cover out
    • Remove the 10mm bolt underneath the headlight
    • Pull the headlight out
    • Disconnect the headlight wiring harnesses
  2. step : Replacing the Bulbs (3:15)
    • This step is only necessary if you are replacing the headlight bulbs
    • Turn the base of the bulbs counterclockwise
    • Remove the old bulbs
    • Insert the new bulbs
    • Turn the new bulbs clockwise
    • For the main bulb, turn the cover counterclockwise
    • Disconnect the main bulb wiring clips
    • Pull up the main bulb wire retainer
    • Push the new main bulb in
    • Reconnect the wiring retainer
    • Reconnect the wiring clips
    • Reconnect the cover, turning it clockwise
  3. step : Installing the New Headlight (4:52)
    • Remove the turn signal bulb from the old light
    • Install the turn signal bulb in the new light
    • Connect the headlight wiring harnesses
    • Put the new headlight into place
    • Insert and tighten the two 10mm bolts at the top of the headlight
    • Pull back the bumper cover
    • Insert and tighten the 10mm bolt at the bottom of the headlight
    • Insert and tighten the 10mm bolt at the side of the headlight
    • Push the bumper cover back into place
    • Pull back the inner fender
    • Insert and tighten the two 10mm bolts behind the inner fender
    • Push the inner fender back into place
    • Insert and tighten the Phillips screw for the inner fender
    • Install the plastic clips for the bumper cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2004 Nissan Altima HID (High-Intensity Discharge) Headlight without Ballast Driver Side

This part replaces:

  • OE # 260753Z701
  • Partslink NI2502143
  • Hollander 114-58880L 114-59220L
  • TYC 20-6628-01
  • DEPO 315-1145L-USH
Only 3 left in stock
Part #: 1ALHL01634

How-to Video:

(07:13 min)