Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
This video is brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi. My name's Mike Green. I want to help you save time and money preparing your vehicle. I have 20 plus years experience restoring and repairing cars and trucks. My company, 1A Auto, sells high-quality replacement parts over the internet. In this video I'll be showing you how to install these parts. By the end of this video, you'll know how to install them and where to get them. That's going to save you time and money. 1AAuto.com. No other company puts a face to their reputation like this one. Thank you. Enjoy the video.
In this video we'll be showing you how to replace a taillight on a 1998 Nissan Altima. This procedure is basically the same for all 1997 to 2006 Nissan Altima's.
Locate your light. We're going to work on the passenger side. There are some clips that hold this trunk mat. You just kind of pull the clips out and pull the trunk mat and the trunk liner back. Then you can see there are four bolts, there, there, there and then in this little access hole. They're 8mm bolts. Once those are removed, then the light pulls away from the body. There's a little button to push on the harness. That pulls apart. Your light's free.
Now if you have a broken light obviously you can replace the whole assembly or you can service your bulbs. They all twist out. That little middle one was kind of a problem on our car. They twist out. Then they push back in and twist in. It's the same thing. Then the middle one is a little bit of a problem to get back in too. There are two smaller teeth and one larger tooth that you have to line up correctly. Round peg, square hole. Then after that, just put it back in and hook up the harness. It's not really that difficult. I just couldn't get it lined up with one hand. Push the light back in. You have four 8mm nuts. Thread them all. Then tighten them up. You're good to go. Again, this is correct for a '97 to '06 Altima.
This video has been brought to you by 1AAuto.com. We truly hope this video's helped you out. We are your source for quality replacement parts and the best service on the internet. You can call us toll free. 888-844-3393. We're the company there for you on the internet and there for you in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to service the bulb as well as replace the entire tail light assembly on this 2003 Nissan Altima. You'll find it's the same for 2002 to 2006 Altimas even though the lights are different for certain years. The items that you'll need for this repair are new tail lights from 1AAuto.com, 8mm socket and ratchet and a Phillips screwdriver.
Start off by going into your trunk and you'll see there's a Phillips clip right there. You want to go ahead and remove that and then pull that out and just pull back the insulation. Here you can see your harness. Just pull that right off, and there's an 8mm nut right there. Pull this harness clip off and, again, there's another 8mm nut. We'll just fast forward as Don removes those. Now, using your screwdriver, just push down on the tab and then pull the harness apart. The tail light will pull right out.
To service your bulbs you just want to twist the socket counter clockwise, pull the bulb out, push your new bulb in and twist the socket clockwise to lock it. The other three are the same.
On the left, you can see, is the old tail light. On the right is the new one from 1A Auto. They're identical and they'll mount exactly the same. Take your new tail light, and run the harness back through the car. Then line up your tail light and push it into place. We'll fast forward as Don replaces those two 8mm nuts. Reconnect your harness and clip that back onto that stud and clip the other clip onto the lower stud. Push your insulation back into place. Take that Phillips clip, and just push it right back into place.
The reasons for changing your tail light assembly are probably either it's broken or you're just looking for the car to look newer, but if you're looking for a slightly different style, if you want to change the appearance of your car slightly, we do have a variety of different tail lights at 1A Auto. Right here you can see the black bezel with the red lens, then the black bezel with the white lens. This is actually a carbon fiber bezel with a white lens. Then we have this black bezel performance pair with the LED lights. We'll turn them on for you. You can see it right there. We have a variety if you want to change the appearance of your car or you need to replace one and you just want something different. These can all be found at 1AAuto.com.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
