Replaces

2002-04 Jeep Liberty Windshield Washer Reservoir (without Low Fluid Provision) - 1AWWR00044

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Our windshield washer reservoirs are some of the highest quality replacements on the market!

Specifications:

  • Brand New Windshield Washer Reservoir
  • Includes Cap
  • Replaces dealer part number: 5066867AA
  • Direct replacement
  • Built to strict quality control standards
  • No Low Fluid Sensor

Now you can buy a high quality windshield washer reservoir that is built to strict quality control standards. Replace your broken or cracked one now with this great fitting washer tank.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:38)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Washer Pump (1:07)
    • Remove the clips from the inner fender with a flat blade screwdriver and pliers
    • Lift up on the tab and pull the inner fender free
    • Pull up on the tab and disconnect the washer harnesses
    • Place a drip pan underneath
    • Lift the washer pump up and out
  3. step : Removing the Washer Bottle (2:12)
    • Let the washer bottle drain
    • Remove the 10mm bolts with a ratchet
    • Drill out the rivet holding the washer bottle
    • Remove the bottle cap and bracket
    • Pull the washer bottle down and out, twist to fit the neck through
  4. step : Preparing the New Washer Bottle (3:14)
    • Pry off the level sensor
    • Pull off the gasket from the sensor and place it on the new bottle
    • Push the sensor into place
    • Make sure the old rivet is drilled out
  5. step : Installing the New Washer Bottle (3:40)
    • Feed and twist the washer bottle angling it properly
    • Replace the bottle cover and bracket
    • Use a bolt and nut or rivet to tighten the bracket
    • Replace and tighten the 10mm bolts
  6. step : Reinstalling the Water Pump (4:47)
    • Insert the bottom of the washer pump into the washer bottle
    • Push the water pump into the washer bottle
    • Reconnect the washer pump harnesses
    • Push the inner fender into place and replace the four clips
  7. step : Reattaching the Wheel (5:20)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts with a 19mm socket
    • Tighten the lug nuts to between 100 ft/lbs in a crossing or star pattern
    • Reattach the wheel cover
  8. step : Servicing the Washer Bottle (5:54)
    • Remove the washer bottle cap
    • Using a funnel with a screen, replace the washer fluid into the washer bottle
    • Replace the cap

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill

  • General Tools

  • Jack Stands
  • Drain Pan
  • Funnel

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2004Jeep Liberty Jeep Liberty Windshield Washer Reservoir (without Low Fluid Provision)
Part #: 1AWWR00044

Out of Stock

How-to Video:

(06:36 min)