Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Jeep Liberty Tail light is just what you need to get your SUV in good looking form again!

Specifications:

  • LH (Driver Side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Jeep Liberty Tail light makes a great replacement and has good cost savings over a dealer unit.

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Tail Light (0:41)
    • Remove the two T20 Torx bolts from the Tail Light bracket
    • Open the trunk to reach the driver side T20 bolts
    • Pull the tail light out
    • Disconnect the tail light wiring harness
  2. step : Servicing the Bulbs (1:15)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Installing the New Tail Light (1:36)
    • Reconnect the wiring harness to the tail light
    • Line up the bolt holes on the tail light bracket to the bolt holes on the vehicle
    • Replace the T20 Torx bolts into the tail bracket

Tools needed for replacement:

    Torx Drivers & Sockets

  • T20 Torx Driver

4.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
1
0
Bad lamps
Fit perfect Turn signal lamp keeps failing ? Works for one blink then acts as if bulb burned out. Check bulb and fine but will not work again. 6 bulbs later Ive decided to purchase the manufactures replacement. Great price at half the cost of manufacturers price if it worked! ??
January 29, 2017
2004 Jeep Liberty Tail light Assy
I received this assembly on time and in perfect shape. The installation was simple and I was able to install the light without incident. Customer service was outstanding. You had exactly what I needed and delivery was on time as promised.
July 30, 2018
Purchase of Jeep Liberty Tail Light
This was probably the smoothest purchase I ever made. Customer service was excellent, the light arrived on time, well packaged and I installed it within a half hour of receiving it. Great experience, thank you A1 Auto. Desmond McLaughlin
October 3, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2004Jeep Liberty Jeep Liberty Tail Light Driver Side
Part #: 1ALTL00319


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:18 min)