1ASFK03935-2002-04 Jeep Liberty Steering & Suspension Kit 6 Piece Set

Replaces

2002-04 Jeep Liberty Steering & Suspension Kit 6 Piece Set TRQ PSA59486

1ASFK03935

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 6 Piece Set
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • Moog ES3535
  • Moog ES3536
  • Moog K3199
  • Moog EV402
  • OE # 52128517AA
  • OE # 52128517AE
  • OE # 5114037AA
  • OE # 5072444AA
  • OE # 5072445AA
FREE SAME DAY SHIPPING
Save 32%
List: $80.95 Save: $26.00
Part 1ASFK03935
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA59486

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   6 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 6 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:06)
    • Mark the center of the tie rod end
    • Measure the distance from the end of the boot to the center of the tie rod end
    • Note that measurement
    • Remove the 21mm nut from the tie rod end
    • Loosen the 15/16 inch nut that connects the outer to the inner tie rod
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Lift the tie rod out of the wheel knuckle
    • Hold the inner tie rod with vise grip pliers
    • Twist off the outer tie rod
  3. step : Installing the New Outer Tie Rod (2:14)
    • Twist the new outer tie rod onto the inner tie rod
    • Start the 21mm nut onto the tie rod end
    • Hold the tie rod stud with a 10mm socket and ratchet
    • Tighten the nut with a 21mm wrench
    • Measure the distance from the end of the boot to the center of the tie rod end
    • This should be the same as the measurement from Step 2
    • Tighten the 15/16 inch nut
  4. step : Reattaching the Wheel (2:58)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern
    • Have your vehicle professionally aligned

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Measuring Tape

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 21mm wrench

  • Wrenches - SAE

  • 15/16 Inch Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2004Jeep Liberty Jeep Liberty Steering & Suspension Kit 6 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS07560
DIY Solutions SUS07561
DIY Solutions SUS00228
DIY Solutions SUS07552
Jeep 5114037AA
Jeep 5072444AA
Jeep 5072445AA
MOOG EV800407
MOOG K3199
MOOG ES3535
MOOG ES3536
MOOG Chassis Products EV800407
MOOG Chassis Products ES3535
MOOG Chassis Products K3199
MOOG Chassis Products ES3536

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA59486
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2002-04 Jeep Liberty Steering & Suspension Kit 6 Piece Set TRQ PSA59486-1ASFK03935 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.