Replaces
2002-04 Jeep Liberty Grille & Molding - 1ABMK00131
1ABMK00131This replacement frame & insert kit is just what you need to get your vehicle in good looking form again!
Specifications:
- Brand New Grille Frame & Insert
- Paint To Match High quality injection molded plastic
- Frame must be painted by buyer to match
- Replaces dealer part numbers: 55156609AB, 55156608AA
- Direct fit replacements
- Built to strict quality control standards
This frame & insert kit makes a great replacement and offers good value over the dealer units.
Paint To Match Note:
"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion.
This part can also be installed without painting if desired.
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
-
step : Removing the Grille (0:34)
- Pull up on the four T20 Torx bolts on the grille by hand
- Pull the grille up and out
- Pry back on the tabs to remove the center part of your grille
-
step : Installing the New Grille (1:41)
- Line up the lower four tabs with the four holes near the bumper
- Tilt the grille in and lean it back
- Push in the sides over the lights
- Replace the four T20 Torx bolts
Tools needed for replacement:
- Flat Blade Screwdriver
- T20 Torx Driver
Screwdrivers & Related
Torx Drivers & Sockets
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Vehicle Fit
- 2002-2004 Jeep Liberty Grille & Molding Smooth - Paint to Match