2002-04 Jeep Liberty Fog / Driving Light - 1ALFL00219

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

• Fits RH (Passenger Side)
• Replaces dealer part number: 5083896AA
• Injection molded plastic
• DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
• Direct replacement fog light
• Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct fit replacement for OEM assembly

Uses same wiring as original assembly.  No cutting or splicing required.

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Servicing the Bulbs (0:33)

• Open the panel door on the wheel well panel
• Twist the bulb socket counterclockwise out of the light
• Pull the bulb off of the socket
• Push on the new bulb
• Twist the bulb clockwise into the light

step : Installing the Fog Light Assembly (1:10)

• Disconnect the wiring harness to the fog light
• Remove the three T20 Torx bolts from the fog light bracket
• Remove the fog light

step : Removing the Fog Light Assembly (1:36)

• Push the fog light into place
• Replace the three T20 Torx bolts into the fog bracket
• Reconnect the wiring harness to the fog light
• Close the panel door on the wheel well panel