Replaces

2002-04 Honda Odyssey Brake Kit Nakamoto CD865, 31317-DSZ - 1APBS00155

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Zinc Coated
  • Kit Includes:
      (1) Rear Ceramic Brake Pad Set
      (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications:
      Solid
      12.32" (313mm)
      5 Lug
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 42510S0XA000, 42510 S0X A00
  • Fits 5 Lug Wheels
  • Solid - not vented

 

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:57)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:23)
    • Remove two 12mm bolts from the brake caliper
    • Pull the caliper toward the outside of the vehicle to push in the piston
    • Pull the caliper aside
    • Pull the brake pads out of the bracket
  3. step : Removing the Brake Rotor (2:15)
    • Remove the 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Loosen the rotor screws with a hammer and impact driver
    • Remove the screws
    • Pull the rotor off
  4. step : Installing the New Brake Rotor (3:34)
    • Slide the rotor on
    • Insert the rotor screws
    • Remove the rubber plug from the old rotor
    • Push the rubber plug into the new brake rotor with a screwdriver
    • Clean the bracket slides with a wire brush
    • Check that the bolt slides move freely
    • If necessary, clean and grease the bolt slides
    • Put the bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 45 foot-pounds of torque
  5. step : Installing the New Brake Pads (5:19)
    • Install the new brake pads into the bracket
    • Use a large C-clamp to push the piston back
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten bolts to 20 foot-pounds
  6. step : Reattaching the Wheel (6:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 - 100 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (7:31)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Hammer
  • Floor Jack
  • Large C-Clamp
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2004Honda Odyssey Honda Odyssey Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
Part #: 1APBS00155


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD865, 31317-DSZ

How-to Video:

(08:03 min)