Replaces

2002-04 Honda Odyssey Brake Kit Nakamoto 31317, 31275, MD865, MD793 - 1ABFS03016

Brake Pad Specifications:

  • Premium Posi Semi Metallic Disc Brake Pads
  • 8 Piece Front & Rear Brake Pad Set
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fit 5 Lug Wheels
  • 11.8" (300mm) diameter vented front
  • 12.3" (313mm) diameter solid rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:57)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:23)
    • Remove two 12mm bolts from the brake caliper
    • Pull the caliper toward the outside of the vehicle to push in the piston
    • Pull the caliper aside
    • Pull the brake pads out of the bracket
  3. step : Removing the Brake Rotor (2:15)
    • Remove the 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Loosen the rotor screws with a hammer and impact driver
    • Remove the screws
    • Pull the rotor off
  4. step : Installing the New Brake Rotor (3:34)
    • Slide the rotor on
    • Insert the rotor screws
    • Remove the rubber plug from the old rotor
    • Push the rubber plug into the new brake rotor with a screwdriver
    • Clean the bracket slides with a wire brush
    • Check that the bolt slides move freely
    • If necessary, clean and grease the bolt slides
    • Put the bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 45 foot-pounds of torque
  5. step : Installing the New Brake Pads (5:19)
    • Install the new brake pads into the bracket
    • Use a large C-clamp to push the piston back
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten bolts to 20 foot-pounds
  6. step : Reattaching the Wheel (6:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 - 100 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (7:31)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Hammer
  • Floor Jack
  • Large C-Clamp
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2004 Honda Odyssey Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto 31317, 31275, MD865, MD793
Part #: 1ABFS03016


Nakamoto
Brand #: 31317, 31275, MD865, MD793

How-to Video:

(08:03 min)