Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • Right Hand Passenger Side
  • Replaces dealer part number: 33101-S9A-A01
  • Includes lens, and housing
  • Includes Integrated parking/marker lamp
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Handling the Bulbs (0:49)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To change the head light bulbs (0:50)
    • Pop the hood and secure it.
    • Reach behind the head light assembly and pull back the retaining wire to remove the bulb.
    • Reverse the process to install the new bulb
  3. step : Remove the front bumper/grille (3:00)
    • Remove ten pushclips, two 8mm bolts and four 10mm bolts using your sockets and ratchets and extensions.
    • Pull off the front bumper cover and grille and set aside.
  4. step : Remove the head light assembly. (5:05)
    • Unbolt the four 10 mm bolts with your socket and ratchet and extensions.
    • Pull the head light assembly up and out.
    • Unplug the harness.
  5. step : Install the new head light assembly (6:10)
    • Install the bulbs into the head light assembly
    • Mount the head light assembly into the head light assembly bracket.
    • Reconnect the harness
    • Bolt in the four 10mm bolts
  6. step : Replace the front bumper cover/grille (8:08)
    • Clip the front bumper cover/grille into place
    • Bolt all the 8 and 10 mm bolts back in and clip in all the push clips.
    • Close the hood and enjoy your new 1A Auto headlights.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2004Honda CR-V Honda CR-V Headlight Passenger Side
Part #: 1ALHL00967


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:00 min)