This replacement mirror is just what you need to get your vehicle in good working condition again!

Mirror specifications:

  • Fits Driver side
  • Power mirror
  • Non Folding
  • Spring mounted base
  • Replaces dealer part number: 22688827
  • Injection molded black plastic housing
  • Can be painted by the buyer to any color desired or installed as is
  • Direct replacement
  • Built to strict quality control standards

This mirror makes a great replacement and has good cost savings over a dealer part.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Part Details

  • Mirror Folding Type: Non-Folding
  • Mirror Operation: Power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:02)
    • Remove the triangular trim panel and disconnect the harness.
    • Remove the insulation
    • Pry up the switch panel and disconnect the harnesses.
    • Remove the screw in the door handle bezel.
    • Remove the uncovered screws as well as one under the pull handle.
    • Remove the reflector and screw behind it.
    • Use a putty knife to pry out the door panel clips.
    • Disconnect the harnesses from the door panel.
  2. step : Removing the Side Mirror (2:31)
    • Disconnect the mirror harness.
    • Remove the three 10mm nuts that secure the side mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (3:22)
    • Feed the harness down into the door
    • Replace the three 10mm nuts.
    • Reconnect the mirror harness
  4. step : Replacing the Door Panel (5:54)
    • Line up the door panel and push it into place.
    • Replace the screws.
    • Replace the door handle bezel and the screw that secures it.
    • Replace the switch panel harnesses and push the switch panel down into place.
    • Replace the mirror insulation.
    • Reconnect the triangular trim panel harness and push the panel back into place.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2003 Pontiac Grand Am Power Non-Folding Mirror Driver Side

This part replaces:

  • Partslink GM1320297
  • Hollander 128-02680L
  • OE # 22688827
Only 5 left in stock
Part #: 1AMRE01328

How-to Video:

(06:55 min)