Specifications

  • Comes as a PAIR
  • Replaces dealer part numbers: 260605Y725, 26060-5Y725 and 260105Y725, 26010-5Y725
  • Includes HID bulbs, ballast (transformer), and all associated transformer wiring
Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Quantity: Pair
  • Light Option: HID (High-Intensity Discharge)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs. Occasionally lighting manufacturers do leave test bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, Parking light, Fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Bumper Cover (0:56)
    • Remove the four clips at the top of the bumper cover by prying up the middle of the clip and pulling the clip out.
    • Remove the Phillips screws under the bumper cover in front of each wheel.
    • Remove the series of clips under the bumper cover.
    • Pull the inner fender back.
    • Remove the upper 10mm bolt behind the inner fender.
    • Carefully pry out the parking lights.
    • Remove the 10mm bolts behind the parking lights.
    • Pull the bumper cover forward and disconnect the fog lights.
    • Pull the bumper cover free.
  2. step : Removing the Headlights (4:47)
    • Use pliers to bend the cover on the lower 14mm bolt under the headlight.
    • Remove the two 14mm bolts under the headlight in the security bracket.
    • Remove the bracket.
    • Remove the two 10mm bolts at the top of the headlight.
    • Pull the headlight forward.
    • Disconnect the harnesses.
    • Pull the headlight assembly up and out.
  3. step : Replacing the Headlight Assembly (7:31)
    • Reconnect the harnesses.
    • Line up the clips on the headlight and push it into place on the car.
    • Replace the two 10mm bolts at the top of the headlight.
    • Reconnect the fog lights on the bumper cover.
    • Put the bumper cover back into place and reinsert the four clips at the top of the bumper cover.
    • Replace the bolts behind the inner fender.
    • Replace the side marker lights.
    • Push the inner fender back into place.
    • Push the bottom panel up and over the front of the bumper cover.
    • Replace the clips under the bumper cover.
    • Reinsert the two Phillips screws under the bumper cover.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 14mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
hdlite assy
Product was as advertised, replaced with no problems whatsoever, wish I had done it sooner.
June 29, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2003 Nissan Maxima HID (High-Intensity Discharge) Headlight Pair

This part replaces:

  • OE # 260105Y725
  • OE # 260605Y725
  • Partslink NI2503144, NI2502144
Only 4 left in stock
Part #: 1ALHP00088

How-to Video:

(11:41 min)