This replacement grille is just what you need to get your vehicle in good looking form again!

Specifications:

  • Injection Molded Silver & Gray Plastic Grille
  • Replaces dealer part numbers: 62070-5Y700, 620705Y700
  • Direct replacement
  • Built to strict quality control standards

This grille makes a great replacement and offers good value over the dealer unit.

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Part Details

  • Color: Silver & Gray

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Bumper Cover (0:46)
    • Pry the plastic clips out of the top of the bumper cover with a flat blade screwdriver
    • Remove the two Phillips screws from the bottom of the bumper cover
    • Pry the plastic clips out of the bottom of the bumper cover with a flat blade screwdriver
    • Pull back each inner fender
    • Remove the two 10mm bolts behind each inner fender
    • Pry out each sider marker light with a flat blade screwdriver
    • Disconnect the side marker light wiring harness
    • Pull the bumper cover forward
    • Disconnect the fog light wiring harnesses
    • Pull the bumper cover down and off
  2. step : Removing the Grille (4:36)
    • Remove the three 10mm nuts from the back of the grille
    • If the nuts do not come off, remove the studs with vise grip pliers
    • Unclip the grille tabs
    • Pull off the grille
  3. step : Installing the Grille (6:33)
    • Put the grille into place
    • Push on the grille tabs
    • Fasten the three 10mm bolts to the grille studs
  4. step : Installing the Bumper Cover (6:58)
    • Lift the bumper cover into place
    • Connect the fog light wiring harnesses
    • Push the bumper cover in
    • Push the clips into the top of the bumper cover
    • Insert the two 10mm bolts behind each inner fender
    • Connect the sider marker light wiring harness
    • Push in the side marker lights
    • Push the inner fender into place
    • Push the splash shield behind the bumper cover
    • Push the plastic clips into the bottom of the bumper cover
    • Insert the two Phillips screws into the bottom of the bumper cover

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
excelllent fit, great video
I hit a deer and this took out the grill and a few other things. The new grill worked great and the video was very very helpful.
January 20, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2003 Nissan Maxima Silver & Gray Grille

This part replaces:

  • Partslink NI1200201
  • Hollander 104-59305
  • OE # 620705Y700
Part #: 1ABGR00394

How-to Video:

(08:59 min)