Replaces

2001-07 Toyota Sequoia Brake Rotor Nakamoto 31267, 31294 - 1ABFS02547

Part Details

  • Front Brake Rotor Specifications:
    Vented
    12.56" (319mm)
    6 Lug
  • Quantity: 4 Piece Set
  • Rear Brake Rotor Specifications:
    Vented
    12.28" (312mm)
    6 Lug

Specifications:

  • Comes as a Set of 4
    • Fits LH (Driver Side) or RH (Passenger Side) Front & Rear
  • Fits 6 Lug Wheel
  • 12.55" (318.7mm) diameter vented front
  • 12.29"" (312mm) diameter vented rear
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:09)
    • Use a flat blade screwdriver to pry off the center cap
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brake Pads (2:12)
    • Using a flat blade screwdriver pry the pistons back into the caliper. Do this on both sides
    • Push down on the clip tab and remove the clip
    • Push the pins out
    • Twist and pull the pins out with pliers
    • Pull the wire clip out at the top of the caliper
    • Pull the pads out
  3. step : Removing the Brake Caliper and Rotors (4:37)
    • Pull the clip above the brakes up
    • Loosen the bolts on the back of the caliper (Use breaker bar or pipe for leverage)
    • Hold the caliper and remove the bolts
    • Pull the caliper up and set it aside
    • Pull the rotor off
  4. step : Replacing the Brakes (6:59)
    • Slide the rotor into place
    • Put the caliper back into place
    • Insert the bolts on the back of the caliper. Torque to 100ft/lbs
    • Replace the clip at the top of the brake
    • Put the pads back into place
    • Put the wire clip back at the top of the brake pads
    • Put the upper pin back in to place
    • Put the lower pin back into place
    • Put the wire clip back into place on the side of the brakes
  5. step : Replacing the Wheel (10:51)
    • Put the wheel back into place
    • Replace the lug nuts
    • Lower the vehicle
    • Torque the lug nuts to 120ft/lbs
    • Replace the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2007Toyota Sequoia Toyota Sequoia Brake Rotor 4 Piece Set Nakamoto

This part replaces:

  • Reference Number 31267
  • Hollander 530-58823
  • Nakamoto 31267, 31294
  • OE # 424316
  • OE # 4243160201
  • OE # 4243160270
  • OE # 43512-0C011
Part #: 1ABFS02547


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 31267, 31294

How-to Video:

(11:57 min)