2001-07 Toyota Highlander Window Regulator Dorman 749-610 - 1AWRG01605

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power

This replacement window regulator is just what you need to get your vehicle in good shape again!


  • RH (Passenger Side) FRONT
  • Does NOT include the power window motor
  • Power operation
  • Direct replacement
  • Built to strict quality control standards

This window regulator makes a great replacement and has good cost savings over a dealer unit.


Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:26)
    • Pry up the master window switch with a trim tool
    • Disconnect the wiring harness
    • Remove the switch
    • Pry up the door pull with a trim tool
    • Pry off the sail panel with a trim tool
    • Pry off the trim door on the door handle
    • Remove the Phillips screw from the door handle
    • Pop the trim off from the door handle
    • Pres in the push clip and remove it from the door panel
    • Remove the Phillips screw from the door panel
    • Pry out the edges of the door panel
    • Lift the door panel up and off of the door
    • Disconnect the courtesy light
  2. step : Removing the Interior Door Handle (4:23)
    • Remove the 10mm bolt from the interior door handle
    • Slide the interior door handle out of the door
    • Pop the lock cable out of the door handle
    • Lift the cable ball out of the lock
    • Pop the handle cable out of the door handle
    • Lift the cable out of the handle
    • Remove the vapor barrier with a razor
  3. step : Removing the Speaker (6:06)
    • Remove the three 10mm bolts from the speaker
    • Remove the speaker from the door
    • Disconnect the speaker wiring harness
  4. step : Removing the Window Glass (6:59)
    • Remove the two 10mm bolts from the window glass
    • Lift the window glass up and out of the door
  5. step : Removing the Window Regulator (8:07)
    • Disconnect the window motor
    • Remove the 10mm bolts holding the window regulator to the door panel
  6. step : Removing the Window Motor (8:53)
    • Remove the T25 Torx screws from the window motor
    • Remove the window motor
  7. step : Installing the Window Motor (10:03)
    • Press the window motor to the window regulator
    • Tighten the T25 Torx screws to the window motor
  8. step : Installing the Window Regulator (10:38)
    • Place a 10mm bolt onto the window regulator
    • Hang the regulator by its bolt
    • Tighten the 10mm bolts to the window regulator
  9. step : Installing the Window Glass (12:25)
    • Lower the window glass into place
    • Tighten the 10mm bolts to the window
    • Connect the window motor wiring harness
  10. step : Installing the Speaker (14:08)
    • Insert the speaker into place
    • Tighten the 10mm bolts to the speaker
    • Connect the motor wiring harness
  11. step : Installing the Interior Door Handle (14:33)
    • Press the water barrier on
    • Hook the cable into the door handle
    • Clip the cable on the door handle
    • Insert the cable ball into the lock
    • Pop the lock cable into the door handle
    • Insert the door handle onto the door
    • Tighten the 10mm bolt to the door handle
  12. step : Installing the Door Panel (16:46)
    • Connect the courtesy light
    • Press the door panel onto the door
    • Tighten the Phillips screw to the panel
    • Press in the push clip
    • Press on the door handle trim
    • Tighten the Phillips screw to the door handle
    • Press on the trim door
    • Press on the door pull
    • Press on the sail panel
    • Connect the wiring harness to the master window switch
    • Press the master window switch into the door panel

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Materials, Fluids, and Supplies

  • White Grease

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2007Toyota Highlander Toyota Highlander Front Power Window Regulator without Motor Passenger Side Dorman 749-610
Part #: 1AWRG01605

Ships in 1-3 Business Days. Delivery times vary.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: 749-610

How-to Video:

(18:53 min)