If your vehicle is leaking coolant around the thermostat, or your thermostat housing is broken or cracked, then this could be your solution.

Specifications:

  • Direct replacement
  • Includes coolant temperature sensor & 2 O-Ring gaskets
  • Replaces dealer part number: 4792630AA, 5269870AB
  • Built to strict quality control standards
  • Plastic construction
  • Fits the following Dodge & Chrysler engines as listed:
    • V6 2.7L
  • Correct for Sedan & Convertible Models
    • Does not fit 2 Door Coupe Models

Over time from thermal expansion and contraction the mating surfaces on the housing can warp or crack. If you are experiencing any of these issues replace your thermostat housing with our direct replacement part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Drain the radiator (0:55)
    • Use a large pair of pliers to open the radiator drain plug.
    • Drain the radiator fluid down into a catch pan.
  2. step : Remove the three hoses connected to the radiator housing (2:00)
    • Pinch the clamp with a pair of pliers and work the hose off the housing.
    • Repeat on the other two hoses.
    • Unplug the wiring harness.
  3. step : Remove the cover next to the throttle intake (3:20)
    • Use a 10 mm socket and ratchet to remove the bolt.
    • Remove the 10 mm bolts securing the upper intake manifold.
    • Now you can access the 8 ten millimeter bolts securing the coolant bleeder housing.
    • Use an 8 mm socket and ratchet with a flex joint and remove the four bolts.
    • Now your bleeder housing is free, pull it up and out.
    • Remove the O rings.
  4. step : Install the new bleeder housing (4:50)
    • Clean up the area.
    • Put the new O rings on the new bleeder housing.
    • Mount the housing and bolt it in with an 8 mm socket, ratchet and flex joint.
    • Secure the upper intake manifold with your 10 mm socket and ratchet.
  5. step : Reconnect the hoses and refill the radiator reservoir (6:10)
    • Connect the three hoses and secure the pinch clamps with a pair of pliers.
    • Reconnect the air pressure sensor wiring harness.
    • Refill the radiator bottle with a funnel and screen and radiator fluid.
    • With the engine running, use an 8 mm wrench to bleed out the air from the coolant system.

Tools needed for replacement:

    General Tools

  • Funnel
  • Drain Pan

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Swivel
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

  • Wrenches - SAE

  • 3/8 Inch Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
excellent service and shipping great price and the video for this product was extremely helpful..thank you
October 18, 2017
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
What are torque specifications for therma stat housing on 2005 dodge stratus?
Billy F on Dec 30, 2016
BEST ANSWER: sorry we do not have this spec avail. Maybe a Chilton or Haynes repair manual would be of assistance

How-to Video:

(07:54 min)

Tools List:

    General Tools

  • Funnel
  • Drain Pan

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Swivel
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

  • Wrenches - SAE

  • 3/8 Inch Wrench



This part replaces:

  • OE # 4792630AA
  • Dorman 902-302

Vehicle Fit

  • 2001-2006 Chrysler Sebring Convertible Sedan Thermostat Housing V6 2.7L for Models with
  • 2001-2006 Dodge Stratus Convertible Sedan Thermostat Housing V6 2.7L for Models with
Part #: 1AEMX00035

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More