Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 14 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    It is recommended to receive a professional alignment after completing this repair

  1. step : Removing the Wheel (0:43)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:05)
    • Use a pair of pliers to straighten the cotter pin and remove it
    • Remove the castle nut with an adjustable wrench
    • Measure the distance from the inner tie rod to the outer tie rod
    • Loosen the nut between the inner and outer tie rod
    • Hammer the knuckle to loosen the outer tie rod
    • Remove the outer tie rod and twist it off the inner tie rod
  3. step : Installing the Outer Tie Rod (2:05)
    • Twist the grease filler into the new outer tie rod
    • Twist the outer tie rod to the inner tie rod
    • Measure the distance and make sure it matches the recorded distance
    • Tighten the nut between the inner and outer tie rod
    • Insert the outer tie rod to the knuckle
    • Replace and tighten the castle nut while lining up the cotter pin hole
    • Insert the cotter pin and twist the ends with a pair of pliers
    • Fill up the grease filler with a grease gun
  4. step : Reattaching the Wheel (3:21)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Measuring Tape
  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Specialty Tools

  • Grease Gun

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:52 min)

Tools List:

    General Tools

  • Hammer
  • Measuring Tape
  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Specialty Tools

  • Grease Gun



This part replaces:

  • Beck Arnley 103-2880
  • Dorman 520-301
  • Dorman 520-302
  • Hollander 512-1126L, 512-1297L, 512-1338
  • Hollander 512-1126R, 512-1296R, 512-1337
  • OE # 4616923, 4764501AC
  • OE # 4616922, 4764500AC, 4764500AE
  • OE # 4695626
  • OE # 4553530010
  • Moog K7306
  • Moog ES80361
  • Moog ES80360
  • Moog EV323
  • Moog K7425
  • Moog K7427

Vehicle Fit

  • 2001-2006 Chrysler Sebring Sedan 14 Piece Set Steering & Suspension Kit
  • 2001-2006 Chrysler Sebring Convertible 14 Piece Set Steering & Suspension Kit
  • 2001-2006 Dodge Stratus Sedan 14 Piece Set Steering & Suspension Kit
Part #: 1ASFK04259

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More