Replaces

2001-06 Nissan Sentra Brake Kit Nakamoto 80093, CD462, S779, 3264 - 1ABCK00030

This brake drum & shoe set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Fits 4 lug wheels
  • Vented

Brake Shoe Specifications:

  • Comes as a set of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Premium Grade Brake Shoes
  • Direct replacement

Brake Drum Specifications:

  • Comes as a PAIR
  • Includes both either LH (Driver Side) & RH (Passenger Side) REAR
  • Fits 4 Lug Wheel
  • Direct replacement
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove your wheel (1:04)
    • Loosen your lug nuts with a tire iron.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the calipers (1:31)
    • Use a breaker bar and a 14 mm socket to remove the two caliper bolts.
    • With a flat blade screwdriver pry in between the pads and rotor to compress the caliper piston
    • Pull the caliper off the rotor.
    • Remove and discard your old brake pads.
    • Now remove the two 17 mm caliper bracket bolts with a socket and breaker bar.
    • Clean up the caliper bracket with a wire brush.
  3. step : Remove the rotor (4:36)
    • Hit the rotor with penetrating oil
    • Use a hammer and gently but firmly tap it to work the rotor off.
    • Clean up your new rotor with brake cleaner.
    • Put the brake rotor onto the hub.
  4. step : install the calipers (6:23)
    • Mount the caliper brackets.
    • Torque the 17 mm bolts to 95 ft lbs
    • Use a c-clamp to compress the caliper
    • Apply anti-seize grease to the edges of the new brake pads and insert them into the brake bracket.
    • Mount the caliper onto the caliper bracket.
    • Torque the 14 mm bolts to 22 ft lbs.
  5. step : put the wheel back on (9:44)
    • Replace the wheel and hub cap
    • Preliminarily tighten the lug nuts.
    • Lower the vehicle.
    • Torque the lug nuts in a star pattern to 100 ft lbs.
    • Pump your brakes and do 5 and 10 mph test stops before driving the vehicle somewhere.

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket
  • 14mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Brakes and AC Compressoe
So I was skeptical about this company because I know people write fake good reviews and all... but I went ahead and ordered anyway. The items came shipped within 2 days and when installed, worked perfectly.

So far so good. Good company.
July 22, 2017
Purchased
7 months ago
Breaks feel great
Had them professionally installed along with new drum break hardware. No more squeaking!
February 6, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:41 min)

Tools List:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket
  • 14mm Socket



This part replaces:

  • Nakamoto 80093, CD462, S779, 3264

Vehicle Fit

  • 2001-2006 Nissan Sentra Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
Part #: 1ABCK00030

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: 80093, CD462, S779, 3264

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More