This replacement mirror is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side)
  • Power
  • Injection molded black plastic housing
  • Direct replacement
  • Built to strict quality control standards
  • Non Heated
  • Non Folding
  • Fits 4 door sedan models only

This mirror makes a great replacement and has substantial cost savings over a dealer unit.

Special Note:

  • Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Part Details

  • Mirror Folding Type: Non-Folding
  • Mirror Operation: Power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:33)
    • Pry up the trap door in the pull cup.
    • Pry off the trap door behind the door handle.
    • Remove the two Phillips screws just uncovered.
    • Remove the four screws around the outside of the door panel.
    • Pull the triangle trim piece off the door.
    • Use a putty knife to pry out the first clip behind the door. Pull the door panel along the edges to release the clips.
    • Disconnect the door handle rod and the harnesses from the back of the door panel.
  2. step : Removing the Side Mirror (2:54)
    • Disconnect the mirror harness from the door.
    • Remove the two 8mm nuts and one 8mm bolt that secure the mirror in place.
    • Pull the mirror free.
  3. step : Replacing the Side Mirror (3:30)
    • Run the harness through the door.
    • Replace the nuts and bolt that secure the mirror.
    • Reconnect the mirror harness.
  4. step : Replacing the Door Panel (4:11)
    • Reconnect the harnesses to the door panel.
    • Reconnect the door handle rod.
    • Put the panel over the lock tab.
    • Line up the door panel and push into place. Hit around the edges to push the clips in.
    • Replace the six Phillips screws.
    • Replace the triangle trim panel.
    • Close the trap doors behind the door handle and in the pull cup.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great value!!
Great replacement. Very fairly priced. Super easy to install.
January 20, 2018
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2006Chrysler Sebring Chrysler Sebring 4 Door Sedan Power Non-Folding Mirror Driver Side
2001-2006Dodge Stratus Dodge Stratus 4 Door Sedan Power Non-Folding Mirror Driver Side

This part replaces:

  • OE # 4805311AD
  • OE # 4805311AC
  • Partslink CH1320211
  • Hollander 128-01353L
  • TYC 3780132
  • DEPO 334-5405L3EFN
Part #: 1AMRE00973


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:26 min)