2001-06 Hyundai Elantra Windshield Wiper Transmission Linkage - 1AWWT00023

Snow, ice, dirt, and dust can interfere or damage your windshield wipers and the motion transmission mechanism. A bent or damaged link can cause the wipers to not work or work incompletely. These parts will also cause an annoying squeaking when they wear out. In general replacing windshield wiper transmission parts is not difficult. This may vary on some applications. It requires basic tools and removal and installation of small body parts such as cowl vent grilles. This replacement wiper transmission connecting rod may be just what you need to get your windshield wiper system working properly again.

This wiper transmission features the following specifications:

  • Fits between windshield wiper motor and wiper arms
  • Replaces dealer part numbers: 98120-2D000, 981202D000
  • Direct bolt on
  • Built to strict quality control standards
  • Stamped construction
  • Complete assembly
  • Includes knurls that wiper arms attach to

This wiper transmission makes a great replacement and allows you to get your windshield wiper system working correctly again.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accessing the Windshield Wiper Transmission (0:48)
    • Pry up the windshield wiper nut covers with a flat blade screwdriver
    • Remove the 14mm nuts from the wipers
    • Pull the wipers off
    • Note any markings that indicate which wiper is for which side
    • Peel the weatherstrip off of the hood cowl
    • Remove the three plastic clips from the cowl
  2. step : Removing the Wiper Transmission (2:38)
    • Remove the three 10mm bolts that hold the wiper transmission in place
    • Disconnect the wiper motor wiring harness
    • Pull the wiper transmission up and out
  3. step : Separating the Wiper Motor from the Wiper Transmission (3:12)
    • Pull the wiper motor wiring harness off of its clip
    • Pry the wiper linkage off the motor with two flat blade screwdrivers
    • Remove the three 10mm bolts that hold the transmission to the motor
    • Pull the motor off of the transmission
  4. step : Attaching the Wiper Motor to the New Wiper Transmission (4:00)
    • Put the motor into place on the transmission
    • Insert the three 10mm bolts into the wiper transmission
    • Put the wiper linkage arms into place
    • Push the wiper motor wiring harness into its clip
  5. step : Reinstalling the Wiper Transmission (4:49)
    • Put the transmission into place
    • Insert the three 10mm bolts that hold the transmission in place
    • Connect the wiper motor wiring harness
  6. step : Reinstalling the Cowl and Wiper Arms (5:25)
    • Put the hood cowl into place
    • Insert the three plastic clips into the hood cowl
    • Put the cowl weatherstrip on, making sure the clips snap in
    • Run the wipers to put the bolts in the rest position
    • Push the wiper arms onto their bolts, about two inches above the cowl
    • Fasten the 14mm nuts onto the wiper arms
    • Put on the nut covers
    • Run the wipers to make sure they work correctly

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 14mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
wiper linkage
Was very impressed with the ease of ordering. Also they were delivered in a quick and timely manner. Thank you very much.
January 25, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2006 Hyundai Elantra Windshield Wiper Transmission Linkage

This part replaces:

  • OE # 981202D000
  • Hollander 621-54318
  • Dorman 602-700
Part #: 1AWWT00023

How-to Video:

(08:06 min)