Replaces

2001-06 Hyundai Elantra Windshield Washer Reservoir - 1AWWR00076

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Includes:   with Washer Pump

Our windshield washer reservoirs are some of the highest quality replacements on the market! This windshield washer bottle has been designed to replace the original designs.

Specifications:

  • Brand New Washer Bottle
  • Direct replacement
  • Replaces dealer part number: 986202D000, 985103B000, 98620-2D000, 98510-3B000
  • Washer pump included
  • Correct for models without rear wiper

Now you can buy a high quality windshield washer reservoir that is built to strict quality control standards. REPLACE your broken or cracked one now with this great fitting washer tank.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Grille (0:43)
    • Remove the Phillips head plastic fasteners along the top of the grille
    • Remove the panel
    • Remove the five Phillips screws along the inside of the grille
    • Remove the grille
    • Remove the two Phillips clips from the bumper cover
  2. step : Removing the Headlight (2:20)
    • Remove the two 10mm bolts from the headlight
    • Disconnect the headlight wiring harnesses
    • Remove the headlight
  3. step : Removing the Parking Light (2:44)
    • Push in the part of the parking light closest to the headlight
    • Pry out the back of the parking light with a flat blade screwdriver
    • Disconnect the parking light wiring harness
  4. step : Removing the Bumper Cover (2:58)
    • Remove the two Phillips head screws on the bumper cover in the wheel well
    • Remove the 10mm nut on the inside of the bumper
    • Remove the plastic fastener on the inside of the bumper cover
    • Remove the two fasteners on the bottom of the bumper cover
    • Repeat the process for the other side
    • Remove the two fasteners on the bumper cover underneath the headlights
    • Gently pull off either end of the bumper cover
    • Remove the bumper cover
  5. step : Removing the Washer Bottle (4:42)
    • Place a drip pain below the washer pump
    • Remove the washer pump wiring harness
    • Remove the washer pump
    • Let the coolant drain
    • Remove the two 10mm bolts from the washer bottle
    • Push the bottle off the post and slide it out
  6. step : Installing the New Washer Bottle (5:42)
    • Insert the bottle into place
    • Insert the two 10mm bolts to the washer bottle
    • Connect the washer pump
    • Connect the washer wiring harness
  7. step : Reinstalling the Bumper Cover (6:48)
    • Insert the bumper cover into place
    • Thread the 10mm bolts on by hand to hold the bumper cover in place
    • Insert the 10mm nut on the inside of the bumper on either side
    • Reinstall the two Phillips head screws on the bumper cover in the wheel well on either side
  8. step : Reinstalling the Parking Light (7:36)
    • Connect the parking light wiring harness
    • Push in the front end of the parking light
    • Slide the light back and snap it in
  9. step : Reinstalling the Headlight (7:48)
    • Reinstall the fasteners on the bottom of the bumper cover
    • Tighten the 10mm bolts behind the headlights and to the radiator support
    • Push in the two fasteners to the bumper cover below the grille mount
    • Push the headlight in place
    • Connect the headlight wiring harness
    • Insert the 10mm bolts to the headlight
  10. step : Reinstalling the Grille (8:49)
    • Insert the grille into place
    • Insert the five Phillips screws along the inside of the grille
    • Replace the panel
    • Insert the Phillips head plastic fasteners along the top of the grille
  11. step : Refilling the Coolant (9:20)
    • Remove the washer bottle cap
    • Insert a filter to the bottle
    • Replace the coolant to the fill line
    • Replace the washer bottle cap

Tools needed for replacement:

    General Tools

  • Funnel
  • Drain Pan

  • Materials, Fluids, and Supplies

  • Anti-Freeze

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2006Hyundai Elantra Hyundai Elantra Sedan Windshield Washer Reservoir with Washer Pump
Part #: 1AWWR00076


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:03 min)