Replaces

2001-06 Hyundai Elantra Sway Bar Link Front Pair - 1ASFK01411

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 5483034500, 54830 34500
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over the dealer parts.

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nut covers with a 22mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. You may need to use a second wrench for extra leverage

  3. step : Removing the Stabilizer Link (1:12)
    • Turn the wheel by hand
    • Hold the upper stabilizer link stud with a 14mm or 9/16 inch wrench
    • Remove the upper nut from the stabilizer link with a 14mm wrench
    • Hold the lower stabilizer link stud with a 14mm or 9/16 inch wrench
    • Remove the lower nut from the stabilizer link with a 14mm wrench
    • Pull off the stabilizer link
  4. step : Reinstalling the Stabilizer Link (2:38)
    • Push the stabilizer link into place
    • Start the 14mm nuts by hand
    • Hold the upper stabilizer link stud with a 14mm or 9/16 inch wrench
    • Fasten the upper nut onto the stabilizer link with a 14mm wrench
    • Hold the lower stabilizer link stud with a 14mm or 9/16 inch wrench
    • Fasten the lower nut onto the stabilizer link with a 14mm wrench
  5. step : Reattaching the Wheel (3:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily with a 22mm socket
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 22mm Socket

  • Wrenches - Metric

  • 14mm Wrench

  • Wrenches - SAE

  • 9/16 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2006 Hyundai Elantra Pair Sway Bar Link Front

This part replaces:

  • Moog K90358
  • OE # 5483034500
Part #: 1ASFK01411

How-to Video:

(04:32 min)