2001-06 Hyundai Elantra Steering & Suspension Kit - 1ASFK04733

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Front Lower Control Arms with Ball Joints
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as a 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (1:04)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:24)
    • Use two 14mm wrenches to hold the back of the sway bar link
    • Remove the two 14mm nuts
    • Pull the sway bar link out
  3. step : Removing the Control Arm (2:50)
    • Loosen the nut from the lower ball joint with a 19mm wrench
    • Hit the spindle with a hammer to free the ball joint
    • Remove the 19mm front control arm bolts with a ratchet and pipe
    • Loosen the 19mm frame bolt with a pipe
    • Remove the 22mm lower control arm bolt
    • Remove the lower ball joint nut
    • Pry out the rear control arm with a pry bar
  4. step : Installing the New Control Arm (6:56)
    • Feed the rear bushing in first with the bolt to know the rear mount it lined up
    • Place the ball joint in the spindle
    • Place the 19mm nut on the ball joint
    • Reinstall the 19mm front control arm bolts preliminarily
    • Reinstall and tighten the 22mm lower control arm bolt
    • Torque the 19mm front bolts between 100 and 110 ft/lbs
    • Torque the 22mm lower control arm bolt to 130 ft/lbs
    • Tighten the 19mm ball joint nut
  5. step : Reinstalling the Sway Bar Link (9:31)
    • Place the sway bar link into the control arm
    • Tighten the 14mm bolts with two 14mm wrenches
  6. step : Reattaching the Wheel (10:28)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts with a 22mm socket
    • Tighten the lug nuts to between 100 ft/lbs in a crossing or star pattern
    • Reattach the wheel cover

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 22mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Awesome total package!!!
I highly recommend this package for anyone who wants to rebuild their front suspension/ steering components! Yhe only thing i would recommend is that the ball-joints should be greaseable.
August 14, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2006Hyundai Elantra Hyundai Elantra 8 Piece Set Steering & Suspension Kit
Only 1 left in stock
Part #: 1ASFK04733

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:25 min)