Replaces

2001-06 Hyundai Elantra Power Window Motor - 1AWPM00096

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement power window motor is just what you need to get your Hyundai Elantra in good shape again! If your window regulator is good, but the motor is burned out, then this is the part for you.

This power motor features the following specifications:

  • Fits the following doors as listed:
    • RH (passenger's side) Front Door
    • RH (passenger's side) Rear Door
  • Replaces dealer part numbers: 82460-2D001, 824602D001, 82460-2D000, 824602D000
  • Direct replacement
  • New not remanufactured
  • Built to strict quality control standards

This power window motor makes a great replacement and has substantial cost savings over a Hyundai Elantra power window motor.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:44)
    • Pop out the trim pieces covering the fasteners with a flat blade screwdriver
    • Remove the two Phillips head screws inside the door pull
    • Remove the Phillips head screw inside the door handle
    • Remove the door handle bezel
    • Remove the two Phillips head screws on the edge of the door panel
    • Pry out the door panel
    • Lift the door panel up and off
    • Disconnect the window switch wiring harness
    • Pry off the water shield
  2. step : Removing the Window Motor (2:27)
    • Disconnect the window motor wiring harness
    • Remove the three 10mm nuts from the window motor
    • Pry off the window motor with a flat blade screwdriver
  3. step : Installing the New Window Motor (4:57)
    • Push the window motor into place
    • Tighten the three 10mm nuts to the window motor
    • Connect the window motor wiring harness
  4. step : Installing the Door Panel (5:51)
    • Put the water shield into place
    • Connect the window switch wiring harness
    • Lift the door panel into place
    • Push in the door panel clips
    • Push on the door handle bezel
    • Replace the Phillips head screw inside the door handle
    • Replace the two Phillips head screws inside the door pull
    • Replace the two Phillips head screws on the edge of the door panel
    • Push on the trim pieces that cover the fasteners

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2006Hyundai Elantra Hyundai Elantra Rear Power Window Motor Passenger Side
2001-2006Hyundai Elantra Hyundai Elantra Front Power Window Motor Passenger Side
Only 3 left in stock
Part #: 1AWPM00096


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:40 min)