2001-06 Hyundai Elantra Control Arm with Ball Joint Passenger Side Front - 1ASLF00605

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Side Location:   Passenger Side
  • Front or Rear Location:   Front
  • Location:   Lower

This replacement control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.


  • Fits RH (Passenger Side) FRONT LOWER
  • Replaces dealer part number: 54501-2D002, 545012D002
  • Includes bushings & ball joint
  • Direct replacement
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:04)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:24)
    • Use two 14mm wrenches to hold the back of the sway bar link
    • Remove the two 14mm nuts
    • Pull the sway bar link out
  3. step : Removing the Control Arm (2:50)
    • Loosen the nut from the lower ball joint with a 19mm wrench
    • Hit the spindle with a hammer to free the ball joint
    • Remove the 19mm front control arm bolts with a ratchet and pipe
    • Loosen the 19mm frame bolt with a pipe
    • Remove the 22mm lower control arm bolt
    • Remove the lower ball joint nut
    • Pry out the rear control arm with a pry bar
  4. step : Installing the New Control Arm (6:56)
    • Feed the rear bushing in first with the bolt to know the rear mount it lined up
    • Place the ball joint in the spindle
    • Place the 19mm nut on the ball joint
    • Reinstall the 19mm front control arm bolts preliminarily
    • Reinstall and tighten the 22mm lower control arm bolt
    • Torque the 19mm front bolts between 100 and 110 ft/lbs
    • Torque the 22mm lower control arm bolt to 130 ft/lbs
    • Tighten the 19mm ball joint nut
  5. step : Reinstalling the Sway Bar Link (9:31)
    • Place the sway bar link into the control arm
    • Tighten the 14mm bolts with two 14mm wrenches
  6. step : Reattaching the Wheel (10:28)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts with a 22mm socket
    • Tighten the lug nuts to between 100 ft/lbs in a crossing or star pattern
    • Reattach the wheel cover

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 22mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Thank you
I appreciate getting what I needed in the time and price I agreed to. Its also nice not getting a bunch of additional ads for things I didnt ask for. Thank you.
November 30, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2006Hyundai Elantra Hyundai Elantra Front Lower Control Arm with Ball Joint Passenger Side
Part #: 1ASLF00605

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:25 min)