This replacement door check is just what you need to get your vehicle in good working form again!

Specifications:

  • Fits LH (Driver Side) FRONT
  • Replaces dealer part number: 4878317AD
  • Reinforced from the original design for better durability
  • Direct replacement
  • Built to strict quality control standards
  • Correct for Sedan (4-door) models only

This door check is a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:40)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Remove the Phillips head screw inside the door handle
    • Remove the Phillips head screw inside the door pull
    • Remove the Phillips head screw at the end of the door panel
    • Remove the three Phillips screws at the bottom of the door panel
    • Pry off the mirror base trim piece by hand
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Pull up the clip and release the door handle rod
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harness
  2. step : Removing the Door Check (2:16)
    • Remove the two T30 screws from the door check
    • Remove the two 10mm nuts on inside of the door check
    • Reach into the door and being to remove the door check
    • Remove the boot from the door check
    • Remove the door check
  3. step : Installing the New Door Check (3:29)
    • Insert the door check into place
    • Replace the 10mm bolts
    • Replace the boots
    • Tighten the two T30 Torx screws
  4. step : Reinstalling the Door Panel (4:24)
    • Lift the lock rod into the door handle and close the clip
    • Connect the door lock wiring harness
    • Connect the window switch wiring harnesses
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips head screw inside the door handle
    • Insert the Phillips head screw inside the door pull
    • Insert the Phillips head screw at the end of the door panel
    • Insert the three Phillips screws at the bottom of the door panel
    • Push on the mirror base trim piece by hand
    • Push on the trim piece inside the door handle
    • Push on the trim piece inside the door pull

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T30 Torx Bit

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2006Chrysler Sebring Chrysler Sebring Sedan Front Door Check Driver Side Dorman 924-154
2001-2006Dodge Stratus Dodge Stratus Sedan Front Door Check Driver Side Dorman 924-154

This part replaces:

  • Hollander
  • OE # 4878317AD
  • Dorman 924-154
Only 2 left in stock
Part #: 1ADMX00185


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Dorman
Brand #: 924-154

How-to Video:

(05:51 min)