Replaces

2001-06 Chrysler Sebring Strut & Spring Assembly - 1ASSP01003

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Detaching the Strut (0:43)
    • Open the trunk
    • Pull back the trunk insulation
    • Pull off the strut cover
    • Remove the two 15mm nuts from the top of the strut
    • Raise and secure the vehicle
    • Apply penetrating oil to the lower strut bolt and nut
    • Remove the 18mm nut from the strut
    • Tap the strut bolt through with a hammer and pick
    • Remove the two plastic clips from the top of the strut
  2. step : Removing the Wheel (2:10)
    • Lower the vehicle to the ground
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Removing the Strut (2:30)
    • Pry off the strut with a pry bar
    • Pull the strut down and out over the wheel
  4. step : Installing the New Strut (2:44)
    • Put the new strut into place over the wheel
    • Pull down the wheel as you push the strut into place
    • Position the strut with a pry bar
    • Hammer the bolt into the strut
    • Fasten the 18mm nut onto the strut bolt
    • Tighten the nut to between 75 - 80 foot-pounds
    • Insert the plastic clips into the top of the strut
  5. step : Reattaching the Wheel (4:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
  6. step : Reattaching the Strut (4:09)
    • Fasten the two 15mm nuts onto the top of the strut
    • Tighten the 15mm nuts to between 40 - 45 foot-pounds
    • Replace the strut cover
    • Put the trunk insulation back into place
  7. step : Fastening the Wheel (4:37)
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Pick

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

4.8 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
7
0
1
0
0
Car drives like brand new
The car is more solid and responsive with the new suspension. It sits a little higher than the original equipment but that is neither good nor bad, just an observation. My only regret is that I should have done this a long time ago.
February 2, 2017
Purchased
1 year ago
RIDES GREAT ALL ARE ON PUT ON MYSELF WII ORDER MORE PARTS THIS WEEK AND ANOTHER SET OF SHOCKS SOON FOR A LEXUS THKVERY MUCH HAVE TOLD OTHERS
March 19, 2017
Purchased
11 months ago
Tremendous ride; great improvement
The struts and springs for my 2004 Chrysler Sebring convertible were, as advertised and like everything else I've gotten, a perfect fit. The improvement is noticeable. I have been pleased with everything I have received from A1 Auto, and I will try to send additional business your way.
January 25, 2017
Purchased
1 year ago
Suspension at a great price
Thank you guy's for great service. The full suspension for my Chrysler Sebring arrived on time and was easy to install with the help of 1a auto.com and the price was unbelievable THANKS AGAIN.
March 11, 2017
Purchased
11 months ago
Very good, was able to fix my suspension!
It was a pain to get the bolts out from the assemblies themselves. You know, the ones where you have to pry down on those Springs to get them out. Anyways I was happy with the whole assembly, it even came with new nuts, and washers for installation. I wish I would of known that before having to file my old nuts, and struggling to take them off, and on, for they had shrunk a size.
April 23, 2017
Purchased
10 months ago
Outstanding!
Exactly what I needed...great price and shipping was ZOOM! Fast! Thank you!!
March 28, 2017
Purchased
11 months ago
Just what I ordered
This was exactly what I needed for my vehicle. Great company to work with, sales person on the phone, very helpful. Delivery was quick.
December 28, 2017
Purchased
2 months ago
2005 sebring convertible install struts and shocks
I ordered the shocks and struts for my sebring convertible, the ordering process was easy and delivery was on time. I installed the shocks and struts and they fit just fine. The issue I have is they raise the height of the vehicle about 3 inches or so. The car looks totally different. Not sure I'm happy with it so I'm giving it a couple of weeks to grow on me.
April 28, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:01 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Pick

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • Monroe 471311

Vehicle Fit

  • 2001-2006 Chrysler Sebring Convertible Front & Rear Strut & Spring Assembly 4 Piece Set
Part #: 1ASSP01003

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More