Replaces

2001-06 Brake Kit Nakamoto MD869, MD759, 5361, 5375 - 1ABFS02438

Brake Pad Specifications:

  • Premium Semi-Metallic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Set of 4
  • Includes both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fit 5 Lug Wheels
  • Direct replacements
  • Front 11-1/8" (282mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:11)
    • Use a lug wrench or 19 mm socket and breaker bar to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Dismantle the brakes and discard the old pads and rotors. (1:36)
    • Observe your rotors and brake pads; look for signs of excess wear, uneven wear, or gouging in the pads and rotors.
    • Unbolt the caliper bolts with an 18 mm socket and ratchet.
    • Use a flat blade screwdriver and a prying motion to compress the caliper pistons enough to get the caliper off the rotor.
    • Discard the old brake pads and compress the caliper with a large c-clamp.
    • Unbolt the caliper bracket with an 18 mm socket and breaker bar.
    • Remove the rotor.
  3. step : Install the new pads and rotor and reassemble the brakes. (5:14)
    • Hit the new rotor with brake parts cleaner or mineral spirits to remove any grease that may cause parts of the brakes to run hot and cause uneven wear.
    • Mount the caliper bracket with your 18 mm socket and breaker bar.
    • Torque the bolts to 95 ft lbs.
    • Mount the new brake pads followed by the calipers.
    • Torque the caliper bolts to 17-18 ft lbs.
  4. step : Replace the wheel (8:30)
    • Mount the wheel and preliminarily tighten the lug nuts (but do not torque them just yet)
    • Lower the vehicle.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T45 Torx Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Brake pad & Rotors
Parts fit and was shipped very timely. I have order other parts after this order , these very high quality part and everything i order was shipped.
June 27, 2017
Purchased
11 months ago
It all came sparkly clean in a big box
Glad to have 1aauto, 100% everytime for me. I only installed the front rear side so far, and everything worked perfect from the video I seen. Make sure if your bleeding the breakers to get a set specified for it, I got a set of metric box wrenches for 26 dollars at autozone, and was so disappointed that none of the them worked. It was a size between 9 and 10 mm which whole set did not have. good luck
March 13, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:27 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T45 Torx Socket



This part replaces:

  • Nakamoto MD869, MD759, 5361, 5375

Vehicle Fit

  • 2001-2006 Chrysler Sebring Convertible Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2001-2006 Chrysler Sebring 4 Door Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2001-2006 Dodge Stratus V6 3.0L 4 Door Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
Part #: 1ABFS02438

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD869, MD759, 5361, 5375

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More