This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 297mm 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade SEMI-METALLIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Fit 5 Lug Wheels
  • Direct replacements
  • 11-1/8" (282mm) Diameter Rotors

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:11)
    • Use a lug wrench or 19 mm socket and breaker bar to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Dismantle the brakes and discard the old pads and rotors. (1:36)
    • Observe your rotors and brake pads; look for signs of excess wear, uneven wear, or gouging in the pads and rotors.
    • Unbolt the caliper bolts with an 18 mm socket and ratchet.
    • Use a flat blade screwdriver and a prying motion to compress the caliper pistons enough to get the caliper off the rotor.
    • Discard the old brake pads and compress the caliper with a large c-clamp.
    • Unbolt the caliper bracket with an 18 mm socket and breaker bar.
    • Remove the rotor.
  3. step : Install the new pads and rotor and reassemble the brakes. (5:14)
    • Hit the new rotor with brake parts cleaner or mineral spirits to remove any grease that may cause parts of the brakes to run hot and cause uneven wear.
    • Mount the caliper bracket with your 18 mm socket and breaker bar.
    • Torque the bolts to 95 ft lbs.
    • Mount the new brake pads followed by the calipers.
    • Torque the caliper bolts to 17-18 ft lbs.
  4. step : Replace the wheel (8:30)
    • Mount the wheel and preliminarily tighten the lug nuts (but do not torque them just yet)
    • Lower the vehicle.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T45 Torx Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2006 Chrysler Sebring 4 Door Sedan Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2001-2006 Chrysler Sebring Convertible Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2001-2006 Dodge Stratus 4 Door Sedan Front Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD869, 5361
Part #: 1ABFS00070

Out of Stock

Nakamoto
Brand #: MD869, 5361

How-to Video:

(09:27 min)