2001-05 Honda Civic Window Regulator - 1AWRG00407

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This power window regulator with motor is just what you need to get your Civic in great working order again!

This power window regulator and motor features the following specifications:

  • Fits Driver side Rear Door
  • Replaces dealer part number:
    • 72750-S5D-A05
  • Does not fit Hybrid Models
  • Built to strict quality control standards
  • Motor and regulator come assembled for easier installation

This Honda Civic power window regulator and motor make a great replacement and have substantial cost savings over a dealer unit.

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:42)
    • Pry off the panel inside the door panel with a flat blade screwdriver
    • Pry off the panel below the door pull with a flat blade screwdriver
    • Remove the two Phillips head screws from underneath the door pull
    • Remove the two Phillips head screws from inside the door handle
    • Pull the door handle out
    • Disconnect the door handle from the latch rod
    • Pry the door panel off with a door panel removal tool or putty knife
    • Disconnect the window switch wiring harness
    • Carefully peel off the water shield using the putty knife to remove adhesive
  2. step : Removing the Window Regulator (3:01)
    • Remove the two bolts that hold the window to the regulator
    • Lift the window up by hand
    • Hold the window in place with painter’s tape
    • Disconnect the window motor lead
    • Move the lead aside
    • Remove the three window motor bolts
    • Remove the three bolts that hold the regulator rail to the door
    • Pull the window motor out of place
    • Pull the regulator assembly up and out of the door
  3. step : Installing the New Window Regulator (5:05)
    • Push the regulator rail and motor into the door
    • Put the motor into place
    • Thread the window motor bolts by hand
    • Push the rail into place
    • Thread the regulator rail bolts by hand
    • Tighten the bolts
    • Remove the painter’s tape from the window
    • Lower the window on to the regulator
    • Start the bolts that connect the window to the regulator
    • Tighten the bolts that connect the window to the regulator
  4. step : Reinstalling the Door Panel (7:39)
    • Thread the window switch wiring harness through the water shield
    • Reattach the water shield
    • Reconnect the window switch wiring harness to the window switch
    • Push the door panel into place
    • Push the door panel clips in
    • Connect the door handle to the latch rod
    • Insert the two Phillips head screws inside the door handle
    • Insert the two Phillips head screws underneath the door pull
    • Reattach the panel into the door handle with the tabs at the bottom
    • Reattach the panel underneath the door pull

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
drop in replacement
I used this to replace the drivers side rear window regulator on my wifes 2001 Honda Civic. It fit perfectly and works great. My wife has been using it for about a month now and it has preformed as expected. It looks to be better built than the original one that I replaced. I would definitely purchase again.
April 24, 2018
Helpful video, fast service and great parts!
I was looking for answers to my stuck rear window on my Honda Civic and came across your YouTube video which gave me the confidence and know how to remove the old unit. I looked locally and only found second hand parts at a wrecking yard and found the price was slightly higher than what I could get from 1A so I opted to get new parts instead. Within a few days my order came in from 1A and again I referred to the video and was walked through step by step on how to reassemble from my bag of bolts. Now I’ve got a working rear window and a more valuable car! I appreciate
June 13, 2018
Great customer service up to and after purchasing parts!
On top of the easy to install video and the warranty of the part I ordered, my purchased from 1AAuto was well worth it. Notifying me when my part shipped and the estimated time it would arrive helped me plan ahead and knock out my vehicle’s problem in just a couple hours!
August 6, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2005Honda Civic Honda Civic 4 Door Sedan (US Built Models) Rear Power Window Regulator with Motor Driver Side
Part #: 1AWRG00407

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:37 min)