Replaces

2001-05 Honda Civic Wheel Bearing & Hub Assembly Rear TRQ BHA86534 - 1ASHS01221

 

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:04)
    • Loosen the lug nuts
    • Raise and secure the vehicle.
  2. step : Remove the hub (1:30)
    • Pull the drum off and set it aside.
    • Use a chisel and hammer to remove the hub nut cap.
    • Use a 32 mm socket and breaker bar to remove the hub nut.
    • Remove the hub.
  3. step : install the new hub (2:30)
    • Apply a small amount of grease to the inside of the hub.
    • Mount the hub and thread the hub nut on.
    • Torque the hub nut to 134 ft lbs
    • Put the center cap on and use a hammer to drive it on securely.
    • Replace the brake drum.
  4. step : Put the wheel on (3:30)
    • Put the hub cap on
    • Hand thread the lug nuts
    • Lower the vehicle
    • Use a criss-cross pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Chisel
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket
  • 32mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2005 Honda Civic Rear Wheel Bearing & Hub Assembly L4 1.7L Models with Rear Drum Brakes Pair without ABS Brakes (1) 32mm Axle Nut Socket TRQ

This part replaces:

  • TRQ BHA86534
Part #: 1ASHS01221


TRQ
Brand #: BHA86534

How-to Video:

(04:18 min)