Replaces

2001-05 Honda Civic Shock & Spring Assembly Pair Monroe Quick-Strut 171340L, 171340R - MNSSP00115

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Accessing the Strut (0:40)
    • Remove the trunk carpet
    • Unscrew the plastic retainer from the trunk trim
    • Remove the two plastic clips from the trunk trim
    • Pull off the trunk trim
    • Remove the two 14mm nuts from the top of the strut
  2. step : Removing the Wheel (1:25)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the four 19mm lug nuts
    • Pull off the wheel
  3. step : Removing the Strut (1:35)
    • Remove the 17mm bolt from the bottom of the strut
    • Pull the strut out of the bracket with a pry bar
  4. step : Installing the Strut (2:38)
    • Lift the strut into place
    • Start the two 15mm nuts onto the top of the strut by hand
    • Pull the suspension down with a pry bar
    • Push the lower strut mount into place
    • Insert the 13mm bolt into the lower strut mount
    • Tighten the 13mm bolt
  5. step : Reattaching the Wheel (3:35)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
  6. step : Fastening the Strut (3:43)
    • Lower the vehicle enough to put weight on the suspension
    • Tighten the two 15mm nuts onto the top strut mount
    • Put the trunk trim into place
    • Push the two clips into the trunk trim
    • Screw the retainer into the trunk trim by hand
    • Put the trunk carpet into place
  7. step : Fastening the Wheel (4:37)
    • Tighten the four lug nuts to 80 foot-pounds in a crossing or star pattern
    • Lower the vehicle completely to the ground

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Swivel
  • Ratchet
  • Torque Wrench
  • 3/8 Inch Drive Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 17mm Socket
  • 14mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2005 Honda Civic Rear Shock & Spring Assembly Pair Monroe Quick-Strut 171340L, 171340R

This part replaces:

  • Monroe Quick-Strut 171340L, 171340R
Only 1 left in stock
Part #: MNSSP00115


Monroe Quick-Strut
Brand #: 171340L, 171340R

How-to Video:

(05:09 min)