This replacement engine mount is just what you need to keep your motor & transmission firm in place!

Specifications:

  • REAR Mount
    • Firewall Side
  • Direct replacement
  • No modifications needed
  • Replaces dealer part numbers: 50810S5A013, 50810 S5A 013
  • Built to strict quality control standards

Replace your broken engine mount now with this great fitting aftermarket part. It makes a great replacement and has good cost savings over a dealer unit.

Part Details

  • Front or Rear Location: Rear

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:41)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Engine Motor Mount (0:53)
    • Carefully jack up underneath the oil pan with a jack and a block of wood
    • Jack up underneath the motor a little to support the engine
    • Disconnect the front exhaust hanger with a pair of pliers
    • Disconnect the two exhaust hangers at the resonator
    • Let the exhaust hang
    • Remove the two 14mm bolts recessed into the subframe
    • Remove the 14mm bolt above the recessed bolts
    • Remove the three 17mm bolts from the rear engine bracket
    • Turn the front wheels to the left by hand
    • Pull the rear motor mount and bracket down and out
  3. step : Preparing the New Rear Engine Motor Mount (2:22)
    • Remove the 17mm nut from the motor mount and bracket
    • Remove the motor mount
    • Insert the new motor mount to the bracket
    • Tighten the 17mm nut to the motor mount and bracket
    • Leave enough play to move the rubber mount freely
  4. step : Installing the Rear Engine Motor Mount (3:22)
    • Insert the rear motor mount into place
    • Insert the shortest 17mm bolt into the top hole
    • Insert the longer 17mm bolts into the bottom two holes
    • Tighten the 17mm bolts
    • Torque the 17mm bolts to 47 foot-pounds
    • Release the jack from the oil pan
    • Tighten the 17mm bolt in the center of the rubber mount
    • Insert the two 14mm bolts recessed into the subframe
    • Insert the 14mm bolt above the recessed bolts
    • Reconnect the exhaust hangers at the front and rear
  5. step : Reattaching the Wheel (4:47)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 17mm Socket
  • 14mm Socket

  • Wrenches - Metric

  • 17mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2005Honda Civic Honda Civic Rear Engine Mount L4 1.7L

This part replaces:

  • OE # 50810S5A013
Part #: 1AEMT00181


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:32 min)