Specifications

  • LH (Driver Side)
  • Replaces dealer part number: 5288765AH
  • Includes side mounted parking/marker light
  • Includes lens, housing, and mounting panel
  • Bulbs not included
This headlight is a great replacement and has good cost savings over a headlight from the dealer.
Fit guaranteed
  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the Wheel (Only if Replacing the Headlight Assembly) (1:10)
    • Using a tire iron or 19mm socket loosen the lug nuts.
    • Lift the vehicle and remove the lug nuts.
    • Pull the wheel off.
  2. step : Changing the Headlight Bulbs (1:20)
    • Turn the wheel to allow access to the small panel inside the inner fender.
    • Push the panel towards the car and down to remove it.
    • Twist the bulb you want to change counterclockwise.
    • Push the tabs on the socket and pull the bulb free.
    • Push the new bulb into the socket.
    • Twist the socket clockwise into the assembly.
    • Replace the panel.
  3. step : Removing the Inner Fender (3:32)
    • Follow the instructions in Step 1.
    • Remove the pin under the bumper holding the lower plastic panels together using a screwdriver or pliers.
    • Remove the three 7mm screws at the front of the inner fender.
    • Remove the three push pins in the inner fender.
    • Remove the five other 7mm screws in the inner fender and under the inner fender.
    • Pull the inner fender down and out.
  4. step : Removing the Headlight Assembly (5:10)
    • Unplug the bulbs.
    • Remove the two 10mm bolts that secure the fender to the bumper cover.
    • Remove the four 10mm bolts around the headlight.
    • Push the bumper cover down and work the light forward and down.
    • Pull the headlight free.
  5. step : Installing the New Headlight Assembly (6:44)
    • Line up the light, putting the outside edge and top in first.
    • Rotate it into place.
    • Reinsert the four 10mm bolts around the headlight.
    • Reinsert the two 10mm bolts securing the fender to the bumper cover.
    • Plug in all the bulbs.
    • Replace the inner fender. Push the pins into place.
    • Reinsert the five 7mm bolts.
    • Replace the front inner fender close out panel.
    • Reinsert the three 7mm bolts.
    • Reinsert the push pin underneath.
  6. step : Putting the Wheel Back On (9:42)
    • Put the wheel into place.
    • Thread the lug nuts and tighten.
    • Lower the vehicle and tighten the lug nuts to 100ft/lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket
  • 7mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2005 Chrysler PT Cruiser Headlight Driver Side

This part replaces:

  • Partslink CH2502131
  • Hollander 114-00662L
  • OE # 5288765AH
  • TYC 20-6024-00-1
  • DEPO 333-1159L-AS
Part #: 1ALHL00807

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(10:23 min)