Replaces

2001-05 Chrysler PT Cruiser Fog / Driving Light Pair - 1ALFP00043

This replacement fog driving light set is just what you need to get your Chrysler PT Cruiser in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog lights
  • Fog lights do not include bulbs or wiring

This PT Cruiser fog driving lamp set is a great replacement and has good cost savings over a fog light from the dealer.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:45)
    • It is not necessary to remove the wheel, but doing so will make the other steps easier
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Accessing the Fog Light (1:13)
    • Remove the plastic clip from the splash shield with a flat blade screwdriver
    • Remove the three 7mm bolts from the inner fender
    • Pull off the inner fender
  3. step : Servicing the Fog Light Bulbs (1:48)
    • Apply penetrating oil to the fog light bolts
    • Turn the fog light bulb counterclockwise
    • Pull out the fog light bulb
    • Disconnect the bulb from its wiring harness
    • Connect the new bulb to the wiring harness
    • Twist the bulb clockwise into the fog light
  4. step : Removing the Fog Light (2:16)
    • Remove the 10mm bolt from the horn
    • Remove the two 10mm nuts from the fog light
    • Disconnect the wiring harness from the fog light
    • Push the fog light forward
    • Pull the fog light up and out
  5. step : Installing the New Fog Light (3:20)
    • Thread the two 10mm nuts onto the new fog light
    • Put the new fog light into place
    • Tighten the two 10mm nuts onto the fog light
    • Put the horn into place
    • Insert the 10mm bolt into the horn
    • Connect the fog light wiring harness
  6. step : Reinstalling the Inner Fender (5:34)
    • Put the inner fender into place
    • Insert the three 7mm bolts into the inner fender
    • Insert the pin into the splash shield
  7. step : Reattaching the Wheel (5:55)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 7mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 7mm Wrench
  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:36 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 7mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 7mm Wrench
  • 10mm Wrench



This part replaces:

  • OE # 5288796AC
  • OE # 5288797AC
  • Partslink CH2593116, CH2592116

Vehicle Fit

  • 2001-2005 Chrysler PT Cruiser Fog / Driving Light Pair
Part #: 1ALFP00043

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More