2001-05 Chrysler PT Cruiser Fog / Driving Light - 1ALFL00058

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement fog driving light is just what you need to get your Chrysler PT Cruiser in good looking form again!


  • Fits LH (Driver Side)
  • Bumper Mounted
  • Injection molded plastic
  • Replaces dealer part number: 5288797AC
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This PT Cruiser fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:45)
    • It is not necessary to remove the wheel, but doing so will make the other steps easier
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Accessing the Fog Light (1:13)
    • Remove the plastic clip from the splash shield with a flat blade screwdriver
    • Remove the three 7mm bolts from the inner fender
    • Pull off the inner fender
  3. step : Servicing the Fog Light Bulbs (1:48)
    • Apply penetrating oil to the fog light bolts
    • Turn the fog light bulb counterclockwise
    • Pull out the fog light bulb
    • Disconnect the bulb from its wiring harness
    • Connect the new bulb to the wiring harness
    • Twist the bulb clockwise into the fog light
  4. step : Removing the Fog Light (2:16)
    • Remove the 10mm bolt from the horn
    • Remove the two 10mm nuts from the fog light
    • Disconnect the wiring harness from the fog light
    • Push the fog light forward
    • Pull the fog light up and out
  5. step : Installing the New Fog Light (3:20)
    • Thread the two 10mm nuts onto the new fog light
    • Put the new fog light into place
    • Tighten the two 10mm nuts onto the fog light
    • Put the horn into place
    • Insert the 10mm bolt into the horn
    • Connect the fog light wiring harness
  6. step : Reinstalling the Inner Fender (5:34)
    • Put the inner fender into place
    • Insert the three 7mm bolts into the inner fender
    • Insert the pin into the splash shield
  7. step : Reattaching the Wheel (5:55)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 7mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 7mm Wrench
  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2005Chrysler PT Cruiser Chrysler PT Cruiser Fog / Driving Light Driver Side
Part #: 1ALFL00058

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:36 min)