2001-05 Chrysler PT Cruiser Combination Switch - 1AZTS00096

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit


  • Controls the following functions:
    • Turn Signal
    • Headlights
    • Hazards
    • Windshield Wipers
  • Black finish on handle
  • Exact replacement
  • Design improved for more durability
  • Detailed graphics
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnect the battery (0:59)
    • Unclip the air box cover and lift it up
    • Use a 10 mm socket and ratchet to disconnect the negative battery terminal
  2. step : Remove the wiper switch lever (1:29)
    • Use a Phillips screwdriver to remove the screws securing the steering column cover
    • Remove the two screws at the top of the switch assembly and move the switch assembly off to the side.
    • Disconnect the wiring connections to the switches.
    • Remove the T10 Torx screws to separate the two switch levers.
  3. step : Replace the switch lever(s) (4:10)
    • Use your T10 Torx driver to secure the levers together.
    • Reconnect all the wiring leads.
    • Mount the switches to the steering column with the two Phillips screws.
    • Clip in the locking tabs in the wiring harness plugs.
    • Replace the steering column cover pieces.
    • Secure the steering column panels with a few Phillips screws.
    • Reconnect the negative battery terminal
    • Replace the air box cover.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver

4.83/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2002 PT Cruiser light switch
Very easy to install. Works great. Didnt take long at all. Hardest thing was disconnecting the battery. Thanks guys.
January 23, 2017
Great Service
I bought the turn signal and fog light switch lever on Thursday had it in my Post Office Box on Monday by 9 a.m. Called my handyman told him I had the part picked him up and returned to my house. It took him a whole 20 minutes from start to finish. The part was the exact same part that was bad; the service was great. If I need any more parts for my PT Cruiser I will order from 1A Auto. Thank you for such great service.
March 10, 2017
Fit Perfect - Easy install
Arrived quickly, easy install . it took about 15 minutes to install and works perfectly. I cant say how long it will last, because I just installed it. We took the car in for inspection, and we had the fuse pulled because of the issue with the fog lights turning on when the car was off and draining the battery. New PA inspection Law states if fog lights are installed they must work as designed or be removed or repaired. they wanted $80.00 just to remove the lights! This did the job.
March 21, 2017
Pretty Easy
Everything went quite well. The U-tube (or whatever its called) was very handy. The only thing was need slightly different tools than specified (No problem at all) Would like to have seen the boot included. Turns out the mechanic that changed it before didnt install any boot. Overall things went quite well and its workin like a champ!
July 5, 2017
Perfect fit
This part is a exact replica of the original part. Installation was a breeze. If your fog lights are activating on their own I recommend this replacement to repair the condition.
August 10, 2017
PT Cruiser Turn Signal and fog light switch
Easy to install and fits perfectly. Looks exactly like factory part. Built well and operates smoothly.
November 28, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2005Chrysler PT Cruiser Chrysler PT Cruiser Combination Switch for Models with Fog Lights
Part #: 1AZTS00096

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:32 min)