Replaces

2001-05 Acura EL Honda Civic Timing Belt Kit with Water Pump, Valve Cover Gasket & Seals - 1AEEK00622

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Our timing belt sets come from a company that is committed to supplying components that are engineered and manufactured under strict quality control procedures. They are leaders in timing component quality which provides you with the highest quality parts available on the market.

Specifications:

  • Kit includes:
    • (1) - Timing Belt
    • (1) - Tensioner
    • (1) - Water Pump
    • (1) - Water Pump Gasket
    • (1) - Crankshaft Seal
    • (1) - Camshaft Seal
    • (1) - Valve Cover Gasket
    • Spark Plug Tube Seals
    • Grommets
  • Direct replacements
  • Fits models with L4 1.7L Engine only

Most car manufacturers recommend changing your timing belt between 50,000 and 70,000 miles (consult your owner's manual to see what your specific manufacturer suggests).

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Valve Cover (0:34)
    • Loosen the two plastic flat head screws from the engine cover
    • Remove the engine cover
    • Disconnect the ignition coil electrical connectors
    • Remove the three 10mm bolts holding the wiring harness to the valve cover
    • Pull the cable hold-down off the stud
    • Pry the wiring harness off of the valve cover with a flat blade screwdriver
    • Remove the four 10mm nuts from the ignition coils
    • Pull out the ignition coils
    • Remove the 10mm nuts from the throttle cable
    • Remove the oil dipstick
    • Twist off the oil cap
    • Disconnect the PVC breather hose
    • Loosen the five 10mm studs from the valve cover
    • Pry the wiring harness retainer from its studs with the flat blade screwdriver
    • Disconnect the A/C line hold-down with a flat blade screwdriver
    • Pull the power steering line off the valve cover bracket
    • Pull the A/C line off the valve cover bracket
    • Lift the valve cover up and off
  2. step : Removing the Valve Cover Gaskets (3:25)
    • Pull up the valve cover gasket with a pick
    • Peel off the valve cover gasket
    • Pull up the ignition coil gaskets with a pick
    • Peel off the ignition coil gaskets
    • Pry the studs off the top of the valve cover
    • Cut off the valve cover stud gaskets with wire cutters or a razor
    • Slide the washer off the stud
  3. step : Installing the Valve Cover Gaskets (5:50)
    • Slide the washers onto the valve cover stems
    • Slide on the valve cover stud gaskets
    • Put the studs into place on the valve cover
    • Install the valve cover gasket with the tabs on the timing cover side
    • Firmly press in the gasket
    • Push in the ignition coil gaskets with the bezel facing the engine side
    • Firmly press in the gaskets
  4. step : Installing the Valve Cover (7:08)
    • Clean the gasket sealing area with a solvent and a paper towel
    • Slide the valve cover onto the timing cover side, first
    • Maneuver the valve cover into place
    • Put the long bolts into the intake side of the engine
    • Put the shorter bolts into the exhaust side of the engine
    • Tighten the 10mm bolts to 7.2 foot pounds of torque
    • Put the wiring harness retainer into place
    • Connect the PVC breather hose
    • Push the power steering hose into the bracket
    • Push the A/C hose into the bracket
    • Push the ignition coils into place
    • Tighten the four 10mm nuts onto the ignition coil
    • Putt the wiring harness into place
    • Connect the ignition coil wiring harnesses
    • Insert the two 10mm bolts into the wiring harness
    • Push the cable retainer onto the stud
    • Fasten the two 10mm nuts onto the cable retainer
    • Tighten all the 10mm nuts and bolts
    • Twist on the oil cap
    • Put the oil dipstick into place
    • Put the engine cover into place
    • Tighten the two plastic flathead screws into the engine cover
    • Start the engine
    • Check for leaks

Tools needed for replacement:

    General Tools

  • Pick

  • Materials, Fluids, and Supplies

  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
0
0
0
1AEEK00622-2001-05 Acura EL Honda Civic Timing Belt Kit with Water Pump Valve Cover Gasket
Delivered as promised and working like a champ! Thank You
February 4, 2017
MATEO
Again the price is very good. First 5000 miles no problem. Timeing belt is made in U.S.A. I hope that this is real ! Everything is match very well .. Thank you .
November 14, 2017
Awesome
Fits perfectly! And with instructional videos made it even simpler to install! With no second guessing
March 24, 2018
Order for hondas
Excellent! Parts got here quicker than expected and everything was what it was supposed to be. I’ll be purchasing more from y’all.
April 13, 2018
Excellent parts and service!!!
I ordered this kit and it matched up exactly with my 2003 honda civic ex. This is not my first time ordering from 1aauto.com and definitely will not be the last. The prices are unbeatable, the shipping is free, the parts are exactly as stated. Thank you 1aauto! And I will for sure be a returning customer 100%
August 12, 2018
2003 Civic 1.7 Water Pump and timing belt
The parts kit was complete and seems to be of very good quality. The instruction video was EXTREMELY realavant and helpful. Only issue, the harmonic balancer bolt was very difficult to remove, though no fault to 1A Auto. Very Satified, Kevin in Missouri.
September 5, 2018
Water pump kit
I am very pleased with the parts I purchased. They arrived in a timely manner and price was excellent. The content of the kit had everything needed for routine maintenance. The kit was well though out. I will use 1auto in the future and share my experience with other.
September 12, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
is there a video for this kit?
John S March 2, 2016
Timing Belt and Water Pump 2001-05 Honda Civic 1 A Auto replacement video https://youtu.be/3PAgdJ1ZSeA
Austin P April 23, 2018
Year Make Model Description
2001-2005Acura EL Acura EL Timing Belt Kit with Water Pump, Valve Cover Gasket & Seals
2001-2005Honda Civic Honda Civic Timing Belt Kit with Water Pump, Valve Cover Gasket & Seals L4 1.7L
Part #: 1AEEK00622


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:40 min)