This replacement Tail light is just what you need to get your Tacoma Pickup in good looking form again!

Specifications:

  • RH (Passenger Side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Includes bulbs, housing, socket and wiring

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Tacoma Pickup Tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:21)
    • Remove the four Phillips screws on the taillight.
    • Pull the taillight out.
    • Disconnect the harness.
  2. step : Replacing the Taillight Assembly (0:49)
    • Pry out the clips left behind in the body of the truck.
    • Reconnect the harness.
    • Line up the taillight and push it into place.
    • Replace the four Phillips screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2004 Toyota Tacoma Tail Light Passenger Side

This part replaces:

  • Partslink TO2801139
  • Hollander 166-59186R
  • OE # 8155004060
  • TYC 11-5535-00-1
  • DEPO 312-1935R-AF
Part #: 1ALTL00244

How-to Video:

(02:28 min)