2001-04 Mazda Tribute Fuel Tank Filler Neck - 1AFMX00207

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement fuel filler neck is just what you need to get your vehicle in good working order again!


  • Fuel Tank Filler Neck
  • Replaces dealer part numbers: EC0542210E, EF2042210, EC05 42210 E, EF20 42210,
  • Direct fit replacement
  • Built to strict quality control standards
  • Replaces any gas tank filler neck that is rusted, rotted, bent, or damaged from an accident

This fuel filler neck is a great replacement and has good cost savings over a gas tank filler neck from the dealer.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Fuel Filler Neck (0:51)
    • Raise and secure the vehicle
    • Pull back the filler neck shield
    • Loosen the clamp on the larger fuel hose with a 6mm socket and ratchet
    • Loosen the clamp on the smaller fuel hose with pliers
    • Pry the fuel hoses off the filler neck with a flat blade screwdriver
    • Remove the 8mm bolt from the filler neck bracket
    • Open the fuel door
    • Twist off the gas cap
    • Remove the two 7mm bolts inside the fuel door
    • Pry off the fuel door housing with a flat blade screwdriver
    • Pull the filler neck down and out through the wheel well
  2. step : Transferring the Filler Neck Shield (2:58)
    • Punch the rivets out of the shield with a punch and hammer
    • Drill out the rivets
    • Take the shield off the old filler neck
    • Put the shield onto the new filler neck
    • Fasten the shield to the filler neck with coarse threaded bolts
  3. step : Installing the Filler Neck (3:57)
    • Lift the filler neck into place
    • Push the fuel door housing into place
    • Start the two 7mm bolts into the fuel door housing
    • Insert the 8mm bolt into the filler neck bracket
    • Tighten the two 7mm bolts inside the fuel door
    • Apply rust penetrant to the fuel hoses
    • Push the fuel hoses onto the filler neck
    • Tighten the larger fuel hose clamp with a 6mm socket and ratchet
    • Tighten the smaller fuel hose clamp with pliers

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 8mm Socket
  • 6mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2004Mazda Tribute Mazda Tribute Fuel Tank Filler Neck V6 3.0L
Part #: 1AFMX00207

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:50 min)