Replaces

2001-04 Ford Escape Mazda Tribute Steering & Suspension Kit 8 Piece Set TRQ PSA58785 - 1ASFK01978

Click Here to Select Your Vehicle and Verify Fit
01-04 Ford Escape, Mazda Tribute Front Lower Control Arm, Tie Rod, Sway Bar Link Kit (8 pc)
Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Front Lower Control Arms with Ball Joints
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the top of the shock (1:02)
    • Pop the hood and apply penetrating oil to the top four bolts.
    • Use a 14 mm socket and ratchet to remove the nuts.
  2. step : Remove the wheel (1:35)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the tire
  3. step : Remove the bottom part of the strut (1:52)
    • Apply penetrating oil to your 10 mm brake line bracket bolt, 14mm Stabilizer link bolt and two 18 mm strut bolts.
    • Unbolt the brake line bracket bolt, and then use your 5 mm Allen wrench to stabilize the bolt and work the nut loose with your 14 mm wrench or socket.
    • Continue to loosen, apply penetrating oil, tighten, loosen, apply penetrating oil and repeat until you work it loose.
    • Use a breaker bar or pipe and ratchet to remove the 18 mm bolts.
  4. step : Install the new strut (7:00)
    • Position your strut into place and thread your 6 nuts on.
    • Torque the top four 14mm bolts to 35 ft lbs.
    • Tighten and torque the bottom two bolts to 85 ft lbs.
    • Bolt your stabilizer link back in as well as your brake line bracket.
    • Use your 14 mm socket, ratchet and 5 mm Allen wrench to install the stabilizer link.
    • The brake line bracket can be reinstalled with a 10 mm socket and ratchet.
  5. step : Put the wheel back on (9:50)
    • Replace the wheel and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

    • Hex Wrenches

  • 5mm Hex Wrench

    • Materials, Fluids, and Supplies

  • Rust Penetrant

    • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

    • Screwdrivers & Related

  • Flat Blade Screwdriver

    • Sockets - Metric

  • 15mm Socket
  • 12mm Socket
  • 13mm Socket
  • 11mm Socket
  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 17mm Socket
  • 10mm Socket
  • 16mm Socket

    • Wrenches - Metric

  • 16mm Wrench
  • 15mm Wrench
  • 17mm Wrench
  • 13mm Wrench
  • 12mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 18mm Wrench
  • 14mm Wrench
  • 11mm Wrench

4.75/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
1
0
0
0
Suspension Kit
My 03 Escape rides like a new car after installing this kit.
February 17, 2018
Excellent
Reasonably priced, fast on time shipping. Packaged well. My mechanic had no complaints about installing the parts. As of yet I have no complaints about their performance.
November 2, 2018
great parts
good service im happy I got such a good deal. everything came in a timely manner
December 10, 2018
Best piece for the kit.
Overall loved the priced and parts. Everything was a breeze.
July 22, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
who is the manufacture for these products?
Ashley H March 7, 2017
I am not sure who manufactured the but I had no issues with the fit.
Keith T March 7, 2017
These are our 1A Auto brand parts. We use multiple vendors based overseas in China, Taiwan, or Japan to make these to meet or exceed OE specifications and to match the OEM parts for a guaranteed direct fit replacement.
Alex P March 7, 2017
Made in China but night and day difference in the handling and no more knocking noise. I have 2003 Tribute with 117k miles. This kit made the car feel new and for the price/ foreseeable life of the car it made sense.
Jaime M March 7, 2017
Year Make Model Description
2001-2004Ford Escape Ford Escape (excluding Hybrid Models) Steering & Suspension Kit 8 Piece Set
2001-2004Mazda Tribute Mazda Tribute Steering & Suspension Kit 8 Piece Set
Part #: 1ASFK01978

Out of Stock

TRQ
Brand #: PSA58785