Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • Right Hand (Passenger Side)
  • Includes lens, housing, and integrated parking/marker lamp
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Servicing the Bulbs (0:59)
    • Remove the rubber boot
    • Pull back the metal retainer
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  2. step : Removing the Bumper Cover (1:35)
    • Pry up the four clips atop the bumper with a flat blade screwdriver
    • Remove the 10mm bolt at the front of the wheel well on both sides
    • Pull the inner fender down and away from the bumper on both sides
    • Pry down the retaining clips underneath the bumper
    • Pull each side of the bumper cover out and pull the cover forward and off
  3. step : Removing the Headlight (3:28)
    • Remove the four 10mm bolts
    • Pull the headlight out
    • Disconnect the wiring harness
  4. step : Installing the Headlight (4:50)
    • Insert the headlight into place
    • Start the top bolt by hand
    • Insert the side bolt
    • Insert the lower bolt
    • Tighten the bolts
    • Connect the lights to the headlight
    • Connect the wiring harness
  5. step : Installing the Bumper Cover (6:45)
    • Insert the bumper cover into place, the top underneath the latch lever
    • Tighten the retaining clips atop the bumper
    • Reinstall the 10mm bolt at the front of the wheel well on both sides
    • Push the inner fender into place
    • Tighten the retaining clips underneath the bumper

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2003Honda Civic Honda Civic 2 Door Coupe Headlight Passenger Side
Part #: 1ALHL00889


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:51 min)