Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Kit Includes: (2) Parking Lights
  • Kit Includes: (2) Headlights
  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : Replacing the Bulb (1:38)
    • Remove two 10 mm bolts securing the fuse box to move it out of the way.
    • Reach into the engine bay behind the headlight assembly and unplug the harness.
    • Unfasten the retaining clip to unplug the bulb.
    • Plug in the new bulb and twist and push it back in.
    • Remove the battery to do the same on the other side.
  2. step : Remove the headlight assembly (3:48)
    • Remove the six 10 mm bolts securing the bumper cover.
    • Use a flat blade screwdriver to remove the push clip on the bumper cover in the center.
    • Remove the push clips in the grill area.
    • Set the bumper cover aside.
    • Use a Phillips screwdriver to remove the screw securing the parking light.
    • Pry off the parking light.
    • Remove the bulb and set aside.
    • Remove the nut and bolt now exposed and the other two on the top and opposing side of the headlight assembly.
    • Unplug the harness from the headlight assembly and set aside.
  3. step : Install headlight assembly (7:30)
    • Preliminarily adjust the new headlight assembly by adjusting the adjustor bolt to the same length as the old assembly.
    • Plug the harness into the new headlight assembly
    • Clip the headlight into place.
    • Use your 10mm socket and ratchet and bolt the assembly back in.
    • Use your Phillips screwdriver to re-install the parking light assembly.
    • Clip the bumper cover back on and use your 10 mm socket and ratchet to bolt the bolt by the far headlight back into place.
  4. step : Install headlight assembly (7:30)
    • Preliminarily adjust the new headlight assembly by adjusting the adjustor bolt to the same length as the old assembly.
    • Plug the harness into the new headlight assembly
    • Clip the headlight into place.
    • Use your 10mm socket and ratchet and bolt the assembly back in.
    • Use your Phillips screwdriver to re-install the parking light assembly.
    • Clip the bumper cover back on and use your 10 mm socket and ratchet to bolt the bolt by the far headlight back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

3.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
1
0
0
They work
First off I bought these to replace foggy and broken headlights so are they better then those sure. The issue I had was the passenger side turn signal housing's mounting screw hole did not line up where it needed to. Second the headlights give kind of a weird angel wing effect where both sides have kind of a bright beam of light going to the left and right of the car which can be distracting if you pay attention to it. other then that like I said they do work.
January 25, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2002 Toyota Corolla 4 Piece Set Lighting Kit

This part replaces:

  • TYC 20-5962-00-1
  • TYC 20-5961-00-1
  • TYC 18-5642-00-1
  • TYC 18-5641-00-1
  • Hollander 114-58819L
  • Hollander 114-58818R
  • Hollander 116-59463L
  • Hollander 116-59462R
  • OE # 81150-02100
  • OE # 81110-02110
  • OE # 81520-02070
  • OE # 81510-02070
  • Partslink TO2502133
  • Partslink TO2503133
  • Partslink TO2530137
  • Partslink TO2531137
Part #: 1ALHT00040

Out of Stock

How-to Video:

(12:33 min)