1ABFS02580-2001-02 Acura MDX Front & Rear Ceramic Brake Pad & Rotor Kit

Replaces

2001-02 Acura MDX Front & Rear Ceramic Brake Pad & Rotor Kit

1ABFS02580

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug
  • Front Brake Rotor Diameter: 11.81 in. (300mm)
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • Reference Number 301 AX31275
  • Reference Number CD865
  • Reference Number CD793
  • Hollander 530-58833
  • OE # 42510-S3V-A01
FREE SAME DAY SHIPPING
Save 25%
List: $200.95 Save: $51.00
Part 1ABFS02580
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11723

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Ceramic
  • Front Brake Rotor Diameter:   11.81 in. (300mm)
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors
      (2) Rear Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:54)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If necessary, kick the tire to loosen the wheel
  2. step : Inspecting the Brakes (1:30)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:12)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pull off the brake pads by hand
  4. step : Removing the Brake Rotor (3:22)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the screws from the brake rotor with an impact screwdriver
    • If you cannot remove the screws, drill them out
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (5:58)
    • Slide the rotor on
    • Insert the screws into the new rotor
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Check that the caliper slides move freely
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the 18mm bolts to between 85 - 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (7:44)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten the 14mm bolts to between 18 - 20foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  7. step : Reattaching the Wheel (9:07)
    • Turn the rotor straight
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (9:44)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 1/4 Inch Drill Bit
  • Drill

  • General Tools

  • Floor Jack
  • Large C-Clamp
  • Jack Stands
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Impact Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 18mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2001-2002Acura MDX Acura MDX Front & Rear Ceramic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31275
Aimco 31318
Bendix PRT5393
Bendix PRT5287
DIY Solutions BFS00844
DuraGo BR31318
DuraGo BR31275
Raybestos SGD865C
Raybestos EHT865H
Raybestos MGD865CH
Raybestos MGD793CH
Raybestos SGD793C
Raybestos EHT793H
Raybestos Brakes EHT793H
Raybestos Brakes MGD865CH
Raybestos Brakes SGD865C
Raybestos Brakes EHT865H
Raybestos Brakes MGD793CH
Raybestos Brakes SGD793C
Raybestos Brakes 96795
Raybestos Brakes 980032
Raybestos Brakes 980666
Wagner BD125674
Wagner BD126051

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11723
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2001-02 Acura MDX Front & Rear Ceramic Brake Pad & Rotor Kit-1ABFS02580 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.