This replacement tail light pair is just what you need to get your Ford Ranger Pickup truck in good looking form again!

This Ford tail light pair features the following specifications:

  • Comes as a pair
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality! Assembly consists of the combination lens w/ reverse light, and housing.

This Ford Ranger Pickup tail light pair makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Taillight Assembly (0:46)
    • Remove the four screws securing the taillight.
    • Pull the taillight out.
    • Twist out the lower socket.
    • Push in the thumb and pull off the connector.
    • Twist out the upper socket.
    • Bulbs can be serviced at this time.
  2. step : Replacing the Taillight Assembly (1:38)
    • Twist in the upper socket.
    • Reconnect the harness.
    • Twist in the lower socket.
    • Line up the taillight assembly.
    • Push it into place.
    • Replace the four screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000 Ford Ranger Tail Light Pair

This part replaces:

  • OE # YL5Z 13404 AA
  • OE # YL5Z 13405 AA
  • Partslink FO2801149, FO2800149
Part #: 1ALTP00083



How-to Video:

(03:09 min)