Replaces

2000-11 Ford Focus Brake Shoes Rear Raybestos 747SG - RABPS00005

RAYBESTOS SERVICE GRADE REAR BRAKE SHOE SET: 747SG

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Specifications:

  • Brand New Raybestos Rear Brake Shoe Set
  • Fits both LH (Driver Side) & RH (Passenger Side)
  • Bonded
  • Size: 8" x 1-15/32"
  • Direct replacements
  • Engineered for safe, quiet braking
  • Replaces dealer part numbers: 1M5Z2200AA, 1M5Z 2200 AA,6S4Z2200A. 6S4Z 2200 A, 6S4Z2200B, 6S4Z 2200 B, 6S4Z2200C, 6S4Z 2200 C, YS4Z2200BA, YS4Z 2200 BA, YS4Z2200CA, YS4Z 2200 CA, V0000747
  • Correct for models with rear drum brakes
    • these are not replacement parking brake shoes for rear disc brake equipped vehicles

Part Details

  • Front or Rear Location: Rear

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Brake Drum (0:52)
    • Remove the wheel by loosening the lug nuts (replace a lug nut and kick the wheel to break it loose if necessary)
    • Use a hammer and cold chisel on the dust cap. Dent the cap down and out. Turn and repeat until it comes free
    • Remove the 30mm socket using a ratchet and breaker bar
    • Pull the drum free
  2. step : Removing the Brake Shoes (1:43)
    • Using pliers lock on the springs and pull them free
    • Remove the two clips using a flat blade screwdriver
    • Pull the brake shoe free
    • Pull the other brake shoe free twisting until the metal ball comes free from the shoe
    • Remove the springs on the backside of the shoe by pulling the pieces apart
  3. step : Replacing the Brake Shoes (5:25)
    • Push the automatic adjuster on the crossbar removed from old brake into place on the new shoe. With a spring in between the parts
    • Use a wire brush to clean the pads the brake shoes fit onto
    • Make sure the cylinder is not leaking
    • Place grease in the divits on the new brake shoes. Attach the emergency brake cable back to the brake shoe
    • Push the pins (springs) back through into the brake shoes
    • Put the other brake shoe into place and insert the clips and springs
    • Slide cross bar back into place
    • Squeeze the shoes together. To help with inserting the blue springs
    • Center the brake shoes
  4. step : Replacing the Brake Drum and Wheels (10:56)
    • Line up the drum and slide it into place
    • Replace the 30mm nut. Torque it to 170 ft/lbs
    • While torqueing it spin the bearings
    • Replace the dust cap
    • Put the wheel into place and tighten the lug nuts to 100 ft/lbs
    • Pump the brakes until the pedal is firm

Tools needed for replacement:

    General Tools

  • Hammer
  • Chisel
  • Wire Brush
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 30mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2011 Ford Focus Rear Brake Shoes Raybestos 747SG

This part replaces:

  • Raybestos 747SG
Only 3 left in stock
Part #: RABPS00005

Raybestos
Brand #: 747SG

How-to Video:

(13:42 min)