Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement inside door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits the LH (Driver Side) FRONT or REAR
  • Injection molded Black handle
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4 Door Sedan or Station Wagon models

This inside door handle is a great replacement and has good cost savings over the dealer unit.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:34)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Remove the T20 Torx screws from the side and bottom of the panel
    • Remove the T20 Torx screw inside the door handle
    • Pry off the trim piece around the door handle
    • Disconnect the wiring harness from the window switch
    • Pry off the triangle panel in the corner with a flat blade screwdriver
    • Remove the 6 1/4 mm bolts from the door pull
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
  2. step : Removing the Door Handle (2:46)
    • Pull off the door handle
    • Put the lock switch into the lock position
    • Pull the latch cable out of the door handle
  3. step : Installing the Door Handle (3:15)
    • Put the lock switch into the lock position
    • Connect the latch cable to the door handle
    • Slide the door handle into place using the locating tabs
  4. step : Reinstalling the Door Panel (3:35)
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert and tighten the T20 Torx screws from the side and bottom of the panel
    • Insert and tighten the T20 Torx screw inside the door handle
    • Insert and tighten the 6 1/4 mm bolts from the door pull
    • Push in the trim piece inside the door handle
    • Push in the trim piece inside the door pull
    • Push in the triangle panel in the corner

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2007Ford Focus Ford Focus Front or Rear Interior Door Handle Driver Side
Part #: 1ADHI00373


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:00 min)